Change Log | Imatest

To obtain the latest version of Imatest (for updates, new installations, and trial as well as and full versions) go to Imatest Download. Imatest perpetual license holders are entitled to free updates for one year from the date of purchase. After that you need to renew. If your license is not current, you can download and install the version that was current one year after the purchase date.

Join Imatest’s Pilot Program and gain early access to new Imatest features and bug fixes. Your feedback is incorporated into each official release to ensure you receive a seamless transition to new versions.

For highlights of Imatest releases, see Imatest Updates and Features.

4.5 is the last version that can run on 32-bit computers.For older releases (pre-4.0) check the Legacy Release Log.

Version	24.2	24.1	23.2	23.1	22.2	22.1	2021.2	2021.1	2020.2	2020.1	5.2
Date mm/yy	10/24	4/24	11/23	05/23	10/22	04/22	11/21	04/21	10/20	03/20	09/19

Version	5.1	5.0	4.5	4.4	4.3	4.2	4.1	4.0	3.10	3.9	3.8
Date mm/yy	07/18	09/17	09/16	03/16	12/15	09/15	03/15	07/14	10/13	12/12	05/11

Major Version:

October 7, 2024

New Features:

Concentric ring FOV module (ISO 8600-3): Accurately measure field of view from a concentric ring target.
eSFR ISO 12233 2023: Support for standard 9-star target and extended target.
Batch folder processing: Drop folders into the main window to be run as a batch with filtering by filename and extension, inclusion by checkbox, and drag-and-drop reordering.
Console panel: Monitor errors, warnings, and informational messages in real-time during image processing.
Restore session: Imatest will remember the last images and selected analysis when closed, and ask if you would like to load them when re-launching.
Settings interface improvements: Warnings will display if invalid values are loaded for settings included in the new main window. Improved format for Stray Light settings.
macOS Sequoia support
Stray Light: Adds support for low memory mode
Stray Light: Adds support for analyzing the median channel
Stray Light: Adds support for additional setting validation
Stray Light: Updates INI syntax
Stray Light: Deprecates some plot formats
Automatic Chart Detection: Now includes the Skip Refinement Step registration mark setting. Enabling this setting increases the likelihood of successful registration mark detection at the cost of less accurate localization.
Automatic Chart Detection: Now includes the High Noise Correction registration mark setting. Enabling this setting increases the likelihood of successful registration mark detection for scenes with poor SNR.
Information Metrics: Now includes updated calculations for compliance with ISO 23654 preliminary working draft 2.
Information Metrics: Now includes Edge Location Standard Deviation output. Edge SNRi removed.
Logarithmic display for Decompanding Plot
User Read Raw to convert RAW file to BMP
Flatfield: different thresholds for light and dark blemishes
Added YUV 422 UYVY and YUY2 file formats
Auto Exposure and Auto White Balance now include the ability to set a custom settling time threshold
Imatest IT: IT/C++ and IT/Objective-C now have samples with CMake project files

Minor Versions

v24.2.1 November 06, 2024

Live acquisition has been fixed for all sharpness modules.
Added a warning prompt for corrupted license file error
Fixed a failure in reading reference file for contrast resolution chart.
SFR Reg- prevents CPIQ (IEEE-1858) data from accumulating in results when performing batch analysis
Fix an issue in IT/python calls for Parallel Analyzer Colorchecker analysis on Linux
Fix a bug in Device Manager that prevented the attributes of certain GenICam devices from being read.
Fixed issue causing certain noise results to be missing from eSFR ISO 2017 color, IT8.7, and CMP DT003 analyses/outputs.
Stray Light- Updates IT Sample INIs to use new syntax

April 24, 2024

New Features:

Registration Mark Detection: Now includes an alternative machine learning/computer vision (ML/CV) registration mark detection method to aid with automatic target identification and ROI placement. This new detection method is available for the following analyses: Random/Dead Leaves, eSFR ISO 12233:2017, eSFR ISO 12233:2023, Star Chart, 36-Patch Dynamic Range, Contrast Resolution, ISO 14524, and ISO 15739.
Improved Handling of DNG files: Added ability to read non-standard bit depth DNG files using direct read option, and Incorporated Adobe DNG SDK into Libraw DNG read option for improved processing according to DNG specification. There is a new dropdown option for the DNG Read method selection in the Options II window, to allow the choice between the original Libraw processing and the new Adobe SDK processing.
Checkerboard: Now includes a High-distortion option for checkerboard detection, providing improved detection robustness for highly distorted images.
Rescharts and Color/Tone: Now includes the ability to hide the text overlaid on select plots as an option under the Display dropdown, located at the top of Rescharts and Color/Tone Interactive windows.
Color/Tone and Stepchart: The functionality of the saturation level setting has been modified to allow for better handling of images with nonstandard bit depth or saturation level offsets.
Edge Information Metrics SNRi and Edge SNRi (Independent Observer Signal-to-Noise Ratios). Measures of the detectability of objects and edges.
Edge Information Metrics Matched filter design Procedure for designing electronic filters that optimize object and edge detection metrics, SNRi and Edge SNRi.
Edge Information Metrics Slanted edge SFR interpolated binning method for reducing spurious high-frequency signals from SFR curves. Reduces sawtooth artifacts in motion blur analysis and improves the reliability of MTF10 measurements, but is not recommended for general use because it lowpass-filters the SFR.
Stray Light support for ITU-R BT.709-6, ITU-R BT.2020-2, and MATLAB luminance calculations.
Stray Light number of saturated pixels per analysis frame.
Stray Light maximum measurable stray light calculation.
Main Window now includes the ability to annotate images with Custom Metadata.
Main Window now includes improved General Settings search with highlighting.

Deprecation

Legacy Distortion module has been deprecated. Use Checkerboard instead.

Minor Versions

v24.1.8 Nov 11,2024

Added new Help menu item to produce diagnostic data for support.
Added a popup for corrupted license file error
Resolved a crash on reloading an acquired image for SFR and Focus Score plus.
Fixed a failure in reading reference file for contrast resolution chart.
SFR Reg- prevents CPIQ (IEEE-1858) data from accumulating in results when performing batch analysis
Fixed Colrochecker-24 autodetection on macOS and Linux.
Fix an issue in IT/python calls for Parallel Analyzer Colorchecker analysis on Linux
Fix a bug in Device Manager that prevented the attributes of certain GenICam devices from being read.
Fixed issue causing certain noise results to be missing from eSFR ISO 2017 color, IT8.7, and CMP DT003 analyses/outputs.

v24.1.7 Oct 04, 2024

Fixed issue with color/tone analysis of colorchecker-24 charts where the gamma value shown in the display and output files would differ.
Notarized Mac OS upgrade build

v24.1.6 Sep 16, 2024

Prevent errors associated with accessing GenICam commands in the Device Manager.
Resolved an error on checkerboard fiducial mark
Fixed a crash on Blemish sequence plot.
Added a new checkerboard chart angle calculation and JSON output (“chart_angle_from_circles_degrees”) based on fiducial circles

v24.1.5 Aug 02,2024

Fixed issue where the value for the cropfmt INI setting could affect which grayscale patches were used for gamma calculation on 24-patch Colorchecker charts
Stray light- fixes an issue reading monochrome images
Corrected ROI numbering for eSFR with extra regmarks
Stray Light- fixes a memory leak saving color mapped metric images or videos
Fix IT direct read image display of monochrome images with extension “row_major_planar”.

v24.1.4 Jul 10, 2024

Improved eSFRiso analysis with highly distorted wedges
Flatfield now saving Blemish count image for IT run
Fix an error in the loading of help files for the classic window.
Corrected mlcv siemens star detection.
Fixed several Flatfield display crashes caused by completely black (or flat) images
Fixes a crash during live acquisition in SFR and SFRplus.
Resolved an error on Flatfield auto analysis with “ISO 18844 flare method C: linearize with colorspace” option

v24.1.3 June 17, 2024

Fixed issue with “Load Color Matrix from clipboard” not being directly compatible with “Copy Color Matrix from clipboard”.
Resolved a crash on Libraw on save image.
Resolved a crash when selecting ROI options in texture analysis.
Resolved a crash on Random-cross method calculation.
Read Raw- Adds warnings when saving settings for cases that may produce unexpected results
Adds calculation-affecting SFR settings to JSON and CSV outputs.
Fixed issue with color/tone analysis in IT failing to perform multi-image signal averaging if the state of the “filecomb” INI field disagreed with the Op Mode parameter.
Fixed issue with certain stray light configuration files failing to be read
Fixed an error with noise plot displays for “General MxN” analysis in “Tone”.
Fixed an issue where floating licenses were sometimes not released upon exiting Imatest
Fixed issue with the color-mapped stray light metric images being upside down
Changed stray light mask area threshold functionality to allow a mask with area “greater than or equal to” the threshold (changed from “greater than”)
Fixed issue with “maximum_measurable_stray_light” not relying on the user-selected saturation setting

v24.1.2 May 24, 2024

Optional parameters like ISO speed, Aperture, Shutter speed, Camera name and Lese name are now available on output files.
Improved checkerboard edge detection.
Fix a parallel pool creation failure on macOS for the IT/python parallel_analyzer_example.py
Resolved a crash in Image processing
Improved Star chart detection.

v24.1.1 May 08, 2024

SFR Plus Auto: Resolves an infinite loop if the edge ID file location changes
Corrected AWB & AE Settling time end point.
Corrected checkerboard uniformity profile location.
Flatfield – Resolved Hot Pixel detection error.
Resolved an auto-detection error in the Color/Tone Objective-C sample for IT.
Resolved a crash on eSFRiso with step chart option selected.
Updated color moir plot analysis
Results of sensitivity measurements are now displaying on Contrast resolution chart analysis.
Updated sensor MTF compensation calculation method.
Changed nonuniformity correction and multi-image signal averaging such that they do not increase the bit depth for 8-bit images
Corrected “worst corner” uniformity result for values >1
Flatfield Auto: fixes an issue where some plots do not save
Added custom metadata documentation link to product.
Updated License library file to latest.
Fixed issue with multi-image signal averaging and temporal noise calculation not functioning correctly.
SFR module: fixes reset to defaults for standards dropdown.
Fixed crash that would occur when saving a uniformity corrected image if performing multi-image signal averaging
Fixed issue with nonuniformity correction being incompatible with “bayer raw” image analysis

November 06, 2023

New Features:

eSFR ISO: Support for analyzing the 2023 “slanted star” revision of the ISO 12233 test chart for measuring resolution and spatial frequency response, enabling sagittal and tangential measurements in the corner of an image.
eSFR ISO & SFRplus: Additional linearization options, including the ability to linearize via the measured OECF.
Dynamic Range Postprocessor: support for images with multi-exposure HDR architecture.
Arbitrary Charts: Includes CIELAB 94 ΔH and CIELAB 2000 ΔH to Arbitrary Charts color analysis.
Installer: significantly reduced installer and installation size.
MacOS 14 Sonoma Support

Stray Light

Supports the IEEE-P2020 pre-release flare attenuation calculation.
Ability to normalize with a reference image of a Lambertian diffuser.
Ability to choose output data transforms including: linear, logarithmic, and decibel.
Ability to subtract off a dark level.
Ability to have level count summary metrics expressed as a percentage.
Ability to select an analysis channel including: RGB, Each Channel, Mean, and Luminance.
Improved visualization of masked pixels in colormapped metric images.
Now includes the minimum measurable stray light in results.

Main Window

New License Manager to administer your Imatest license. Activate, deactivate, and more.
Includes the ability to view the first frame of video files in Image Preview.
Includes General Settings performance improvements.

Bug Fixes

Color/Tone: Temporal noise fixes, improvement in calculation when subtracting offsets, more robust and more accurate results.

Minor Versions

v23.2.13 October 24,2024

Device Manager – Added new Help menu item to produce diagnostic data for support.
Prevent errors associated with accessing GenICam commands in the Device Manager.
A new checkerboard chart angle calculation and JSON output (“chart_angle_from_circles_degrees”) has been added
IT/EXE now respects the file and display logging level settings.
Fixed issue with color/tone analysis of colorchecker-24 charts where the gamma value shown in the display and output files would differ.
Fixed a failure in reading reference file for contrast resolution chart.
Fix an issue in IT/python calls for Parallel Analyzer Colorchecker analysis on Linux
Fix a bug in Device Manager that prevented the attributes of certain GenICam devices from being read.

v23.2.12 August 15, 2024

Resolved a crash on PSF plot
Fixed Layout size issue on FR learning page and General settings.
Fixed issue where the value for the cropfmt INI setting could affect which grayscale patches were used for gamma calculation on 24-patch Colorchecker charts
Stray Light- fixes a memory leak saving color mapped metric images or videos

v23.2.11 June 24,2024

Improved eSFRiso analysis with highly distorted wedges
Resolved a crash when selecting ROI options in texture analysis.
Resolved a crash on Random-cross method calculation.
Fixed issue with “Load Color Matrix from clipboard” not being directly compatible with “Copy Color Matrix from clipboard”
Read Raw- Adds warnings when saving settings for cases that may produce unexpected results
Fixed issue with color/tone analysis in IT failing to perform multi-image signal averaging if the state of the “filecomb” INI field disagreed with the Op Mode parameter.
Fixed issue with certain stray light configuration files failing to be read
Fixed an error with noise plot displays for “General MxN” analysis in “Tone”.
Fixed an issue where floating licenses were sometimes not released upon exiting Imatest
Changed stray light mask area threshold functionality to allow a mask with area “greater than or equal to” the threshold (changed from “greater than”)
Fixed several Flatfield display crashes caused by completely black (or flat) images
Fixes a crash during live acquisition in SFR and SFRplus.

v23.2.9 May 22, 2024

Optional parameters like ISO speed, Aperture, Shutter speed, Camera name and Lese name are now available on output files.
Improved in checkerboard detection.
Flatfield – Resolved Hot Pixel detection error.
Updated color Moir plot analysis
Fix a parallel pool creation failure on macOS for the IT/python parallel_analyzer_example.py
Results of sensitivity measurements are now displaying on Contrast resolution chart.
Updated sensor MTF compensation calculation method.
Changed nonuniformity correction and multi-image signal averaging such that they do not increase the bit depth for 8-bit images.
Fixed issue with multi-image signal averaging and temporal noise calculation not functioning correctly.
Fixed crash that would occur when saving a uniformity corrected image if performing multi-image signal averaging.
Fixed issue with nonuniformity correction being incompatible with “bayer raw” image analysis

v23.2.8 April 30, 2024

SFR Plus Auto: Resolves an infinite loop if the edge ID file location changes
Bugfix to enable Color/Tone analysis of videos containing saturated frames. The saturated frame will be skipped and analysis will proceed.
Resolved a crash on eSFRiso with step chart option selected.
Windows Master and Studio uninstallers now remove the registry keys for the uninstaller.
Fix a crash on macOS when attempting to add a sensor in Lighting Control
Resolved a crash on SFRplus when selecting Distortion correction.
Fixed issue where Checkerboard Auto analysis would cancel mid run with “No regions: fast geometry calculation” as the ROI selection option.
Corrected IT8.7 module with reference file upload option.
Add ini key for user control of light/dark threshold in flatfield.
Fixed crash that would occur when saving summary output files with “No regions: fast geometry calculation” as the ROI selection option.
Fixed issue where selections for the stray light “video formats” settings were being ignored.
Flatfield Auto: fixes an issue where some plots do not save.
ISO 18844: fixes an issue batch processing images

v23.2.7 April 04, 2024

Dot Pattern- prevents a crash generating 3D LCA plots if data are invalid.
Dot Pattern- Fixes an issue analyzing monochrome images.
EDU Apps- Fixes issue where noise level in MTF app is not displayed.
Batchview- fixes a crash when selecting “Auto Global” scaling.
New Settings GUI: Fixes an issue saving/loading settings.
Corrected MTF units on plot.
Stray light: removes unused ini entry
Edge orientation information is output to the JSON results file for SFR module.
Significantly reduced installation time.
Batchview: Unhides text if values are too low.
Fixed crash related to region detection for “SFRreg center test charts” in images containing many SFRreg targets.
Fixed issue where some images would appear dark on certain ROI selection windows
Stray light: fixes an issue where the mask of a normalization (reference) image was not saved.
Test Charts: fixes a bug when invalid custom chart heights are used.
Random/Dead-Leaves: Adds checks against selecting invalid settings combinations.
Chart MTF Compensation: Improves logic with the ability to save/read compensation files.
New Settings: prevents a crash when trying to save settings.
Fixed an error in the C++ Stray Light sample.
Added warning messages on Test charts if large charts chosen.
Fixed an issue where distortion-corrected image output from checkerboard auto runs was ignoring the division model setting, resulting in bad distortion correction. Distortion-corrected image output from checkerboard analysis now also respects the center of distortion as well as the magnification setting from Rescharts Display “7. Image, Geometry, Distortion, FoV”. The default value for the associated INI field “distortMag” has changed. To get the legacy default behavior, users may need to either change the magnification setting from the Rescharts display, reset their INI, or change the value for the [checkerboard] distortMag INI field from [1 1 1 1 1] to [1 1 0 1 1].

v23.2.6 March 08, 2024

Correction to flatfield auto outputting same blemish plots for all images in a batch run
Fixed an error on focus field – Unrecognized field name “edgeInfoCap_all”.
Fixed issue related to finding more than the expected number of bars in an eSFR ISO wedge causing calculations to fail.
Fixed crash that would occur if no regions were detected within user defined radial zones (Checkerboard).
Rescharts 3D & Contour Plots: Improves messaging when there is not enough data to produce the plot
Rezchecker add support for CPIQ exposure loss
Fixed issue where some data points were sometimes not being plotted on ISO 15739 SNR plots
Batchview: fixes the colors or bars and line plots.
Batchview: improves legend placement
Fixed issue with scaling of image data when selecting a downsampling option in Checkerboard setup.

v23.2.5 February 13, 2024

Adds some JSON outputs for ISO 15739
Fix notarization failures in 23.2 Mac builds

v23.2.4 February 05, 2024

Dot Pattern – Fixes crash if analyzing images with an alpha channel
Linux uninstall will now completely remove the installation directory and its files.
The legend for the Delta-C ab subplot of the Tonal Response plot in eSFRiso Setup is not movable and avoid overlapping with data points.
Stray Light- Fixes issue where cropping settings were not applied to normalization images
Stray Light- fixes “minimum measurable” calculation when a non-zero dark level is used.
Fix an access issue with the settings file for certain image acquisition devices in acquire image.
SFRplus: fixes an issue with improperly formatted deconvParam settings in the INI

v23.2.3 January 15, 2024

Fixed a crash that would occur for checkerboard analysis with no edge regions selected.
A warning dialog is show when there saving to SVG fails in Test Charts.
Fixed reading of the “ysignaltype” INI setting for eSFR analyses.
Fixed aspect ratio arrows for 12233 2023 extended chart
Combined image for signal averaging from ColorTone multi-file analysis is now saving from Frontrage UI too.
Fixed 3D contour plot manual scaling option.

v23.2.2 December 7, 2023

The calculation of the “lightness uniformity” metric from the ISO 17957 shading standard has been fixed
Fixed the coordinate system of the Checkerboard “Central square X,Y pixel shift” values when an image crop is selected. The coordinate is now stable regardless of crop amount.
Stray Light: fixed documentation of JSON results
Fixed normalization of image data in some edge cases
Rescharts “Display 7. Image, Geometry, Distortion, FoV” display no longer shows some ROIs when “Do not display ROIs” is selected

v23.2.1 November 14, 2023

Resolved a crash on SFRplus auto analysis when saving json with linearization method =4
Updated the default slanted confidence threshold from 0.5 to 0.1
Resolved a crash in ColorTone with rotated/mirrored images
Flatfield – Fixes crash if the spatial calculation is ISO 17957 but the grid size is not 11×11 (ISO 17957)
Fixed a crash in the Flatfield Uniformity Settings window
Stray light: prevents analysis from running when the failure to use “clip to one” will lead to a crash
Fixes the ability to combine multiple tga files for analysis

May 02, 2023

New Features:

New slanted-edge-based measurementsincluding Information Capacity, SNRi, Noise Power Spectrum, and Noise Equivalent Quanta.
New Settingsinterface: With improved user experience and search. These new settings replace the ROI Options, Options II, Options III in previous releases.
Flatfield: Addition of EMVA1288 row/column noise calculations.
Main WindowAll image formats now can be previewed, loading time improvements for large sets of images.
Image Metadata Storage:Importing EXIF information for preview of relevant information about each image.
Improved SFRreg Detectionusing an artificial intelligence model for all targets with registration mark detection (eSFR ISO, 36-Patch DR, Contrast Resolution, Siemens star).
Gamutvision 2.0, incorporation of a color gamut viewer originally launched by Imatest in 2006.

Stray Light

Added ability to normalize by a user-provided value.
Added ability to have separate masking settings for the reference image.
Output pixel count above a threshold.
Switches to median aggregation in reference image normalization.
Added ability to directly use the image processing mask method.
Added ability to set the threshold in image processing masking via Otsu’s method.
Added a minimum source threshold to the image processing method.
Added other compensation factors for normalization via a reference image.
Larger summary plots, updates to nomenclature.

Arbitrary Charts

Video support
Distortion parameterfor supporting distorted targets.
VCX exposure adaptation measurement.

Minor Features

Tour Mode starts from the welcome window to demonstrate the usage of the new main window.
Improvement of default settingsfor slanted-edge region selection, stepchart ROI fill-factor and Delta-E 00 color correction.
Color/tone: split plot improvement to include exposure-matched reference value.
Offline Floating License Server: Allows deployment of concurrent licenses and virtual machines in an offline environment.
IT/EXE: Improved command line interface.

Known Issues

Linux mp4 file read/write does not work

Minor Versions

v23.1.15 Oct 16,2024

Device Manager – Added new Help menu item to produce diagnostic data for support.
Prevent errors associated with accessing GenICam commands in the Device Manager.
Fix IT direct read image display of monochrome images with extension “row_major_planar”.
IT/EXE now respects the file and display logging level settings.
Fix an issue in IT/python calls for Parallel Analyzer Colorchecker analysis on Linux

v23.1.14 July 22, 2024

Resolved a crash when selecting ROI options in texture analysis.
Resolved a crash on Random-cross method calculation.
Fixed an issue where floating licenses were sometimes not released upon exiting Imatest
Fixed a crash during live acquisition in SFR and SFRplus.
Fixed the layout size issue with FR settings.

v23.1.13 May 23, 2024

Optional parameters like ISO speed, Aperture, Shutter speed, Camera name and Lese name are now available on output files.
SFR Plus Auto- Resolves and infinite loop if the edge ID file location changes
Flatfield – Resolved Hot Pixel detection error.
Updated color Moir plot analysis
Fix a parallel pool creation failure on macOS for the IT/python parallel_analyzer_example.py
Results of sensitivity measurements are now displaying on Contrast resolution chart.
Flatfield Auto- fixes an issue where some plots do not save.
ISO 18844- fixes an issue batch processing images

v23.1.12 April 12, 2024

EDU Apps- Fixes issue where noise level in MTF app is not displayed
Dot Pattern- prevents a crash generating 3D LCA plots if data are invalid.
Dot Pattern- Fixes an issue analyzing monochrome images.
Fixed a crash on Focus field.
Batchview- fixes a crash when selecting “Auto Global” scaling.
Bugfix to enable Color/Tone analysis of videos containing saturated frames. The saturated frame will be skipped and analysis will proceed.
Edge orientation information is output to the JSON results file for SFR module.
Windows Master and Studio uninstallers now remove the registry keys for the uninstaller.
Batchview- Unhides text if values are too low.
Fixed issue where Checkerboard Auto analysis would cancel mid run with “No regions: fast geometry calculation” as the ROI selection option.
Test Charts- fixes a bug when invalid custom chart heights are used.
Random/Dead-Leaves- Adds checks against selecting invalid settings combinations.
Chart MTF Compensation- Improves logic with the ability to save/read compensation files.
New Settings- prevents a crash when trying to save settings.
Fixed an error in the C++ Stray Light sample.
Stray Light IT- resolves a crash if invalid image files are used
Add ini key for user control of light/dark threshold in flatfield.
Fixed crash that would occur when saving summary output files with “No regions: fast geometry calculation” as the ROI selection option.
Fixed an issue where distortion-corrected image output from checkerboard auto runs was ignoring the division model setting, resulting in bad distortion correction. Distortion-corrected image output from checkerboard analysis now also respects the center of distortion as well as the magnification setting from Rescharts Display “7. Image, Geometry, Distortion, FoV”. The default value for the associated INI field “distortMag” has changed. To get the legacy default behavior, users may need to either change the magnification setting from the Rescharts display, reset their INI, or change the value for the [checkerboard] distortMag INI field from [1 1 1 1 1] to [1 1 0 1 1].

v23.1.11 March 18,2024

Set ROI by coordinates is now possible.
Correction to flatfield auto outputting same blemish plots for all images in a batch run.
Fixed error on focus field >Unrecognized field name “edgeInfoCap_all”.
New Settings GUI: Fixes an issue saving/loading settings.
Rescharts 3D & Contour Plots: Improves messaging when there is not enough data to produce the plot.
Rezchecker add support for CPIQ exposure loss.
Significantly reduced installation time.
Fixed an error on Focus Field when loading in JSON with missing fields.
Batchview: fixes the colors or bars and line plots.
Batchview: improves legend placement.
Fixed crash related to region detection for “SFRreg center test charts” in images containing many SFRreg targets.
Fixed issue where some images would appear dark on certain ROI selection windows

v23.1.9 February 22, 2024

Dot Pattern- Fixes crash if analyzing images with an alpha channel.
Fixed issue related to finding more than the expected number of bars in an eSFR ISO wedge causing calculations to fail.
Linux uninstall will now completely remove the installation directory and its files.
The legend for the Delta-C ab subplot of the Tonal Response plot in eSFRiso Setup is not movable and avoid overlapping with data points.
Fixed crash that would occur if no regions were detected within user defined radial zones (Checkerboard).
Fixed issue where some data points were sometimes not being plotted on ISO 15739 SNR plots.
Fixed flatfield analysis issue where “Optical center” text was only displayed when “Defective Pixels” measurement was turned on.
Fixed an access issue with the settings file for certain image acquisition devices in acquire_image.
Adds some JSON outputs for ISO 15739

v23.1.8 January 05, 2024

The calculation of the “lightness uniformity” metric from the ISO 17957 shading standard has been fixed
Fixed a crash that would occur for checkerboard analysis with no edge regions selected.
A warning dialog is show when there saving to SVG fails in Test Charts.
Fixed the coordinate system of the Checkerboard “Central square X,Y pixel shift” values when an image crop is selected. The coordinate is now stable regardless of crop amount.
Resolved an error on save demosaiced rgb file as bmp from Rawview.
Combined image for signal averaging from ColorTone multi-file analysis is now saving from Frontrage UI too.
Fixes normalization of image data in some edge cases.
Fixed a crash that would occur when selecting Rescharts display “17. 3D image surface plot” when analyzing an image of a contrast resolution chart.
IT Pass/Fail: Fixes documentation link
Flatfield manual scaling: fixes documentation link.
Fixes a crash when dealing with settings that fail validation.
Fixes an issue in the error reporting system

v23.1.7 November 08,2023

Checkerboard – 3D plots now save horizontal and vertical edge result plots.
Fixes the ability to combine multiple tga files for analysis
Arbitrary charts: fixes a crash handling errors when analyzing videos
Resolved an error on save Color/Tone settings.
Updated Dynamic Range plotting pint with associated patch number.
Resolved an issue with Analysis button status with respect to license support date.
Corrected Flatfield EMVA 1288 Spatial noise RMS value.
Resolved a crash on Colortone with nonuniformity correction
Fix ‘row_major_interleaved’ array format by adding ‘row_major_interleaved_rgb’, ‘row_major_interleaved_bgr’, ‘row_major_interleaved_rgba’, ‘row_major_interleaved_bgra’ formats to be used in its stead.
Changed RMS label to standard deviation in flatfield emva stats display
Resolved a crash in ColorTone with rotated/mirrored images
Flatfield: Fixes crash if the spatial calculation is ISO 17957 but the grid size is not 11×11 (ISO 17957)
Fixed a crash in the Flatfield Uniformity Settings window

v23.1.6 September 29,2023

Resolved a crash trying to create a test chart on mac and linux
Corrected Y-Center shift values in checkerboard output.
Fixed interlaced video support as well as non-default video input support
Updated aspect ratio iso 18844 flare image.
Stray light: fixed labeling logic if azimuth angles are provided and field angles are not
Fixed Colorchecker crash on Linux OS

v23.1.5 September 14,2023

Updated Blackmagic Decklink SDK version to 12.4.2
Stray light: fixes issue loading enumerations from INI
“Analyze” button is now available on Japanese machines.
Resolved an issue with Tour mode if engine is not ready.

v23.1.4 August 29,2023

Information capacity results have been added to CSV output for all channels.
Falt field >Disabled the option read separate files in interactive mode.
Fixed an error on flatfield auto analysis with V&H spectrogram plot.
Updated IT installer with python whl file.
Fixed a crash when saving files using relative paths
Fixed an issue that caused the results directory input for IT/EXE to be required

v23.1.3 August 03,2023

Corrected ROI selection display on output screen with IE TE276 random dead leaves cross analysis.
SFRplus- Resolved a crash on selection of ROI with bad edge fit.
Enabled “Plot metric with respect to time” option for AWB/AE measurements in QA-62, TE269 and Dream Catcher 48
Updated SFRreg manual Roi selection.
Corrected blemish analysis settings dependency from previous run.
Resolved an error on flatfield PRNU and DSNU results.
Updated dropdowns from “ISO 12233:2022” to “ISO 12233:2023”.
Updated Dot pattern output with x,y vector data for displacement due to distortion, for each dot.
Corrected checkerboard Ctr-Corner % distance in auto analysis.
Dot pattern json “target_distance_units” updated correctly.
Rescharts grayscale reference file selection saved for subsequent runs.
Fixed arbcharts default settings.
Resolved an error on IT parallel processing.

v23.1.2 June 02,2023

Resolved an error on loading gray scale reference file in eSFRiso.
Fixes issue when selecting multiple files on macOS.
Resolved an issue on Linux Master and Studio where libMatlabDataArray.so was not locatable.
Resolved an issue with legacy license manager launching with no internet access.

v23.1.1 May 22,2023

Resolved Information Capacity, SNRi, NPS, and NEQ “single-channel-only” analysis of color images error in interactive slanted edge modules.
Information Capacity, SNRi, NPS, NEQ plots are available in auto slanted edge modules.
Resolved an error in Sfr_plotcash on SFRreg auto analysis.
Added “Save settings to INI” option on Arbitrary charts.
SFR Reg: resolved a crash on batch analyzing files
Fixes changelog and documentation links to point to the correct version
Stray light:
1. fixes issue where results are not saved to output folder
2. Fixes FITS output images, which were upside down.

October 10, 2022

New Features:

Stray Light Analysis Feature – Imatest analyzes images of a bright light source and calculates the stray light for each image. The included stray light metrics in Imatest 22.2 are Point Source Rejection Ratio (PSRR) and unnormalized stray light. The primary output of the analysis are stray light metric images which quantify the amount of stray light in the input images. Other outputs include light source mask files, various summary statistics in standard output formats, as well as colormapped plots and videos. This feature is a step towards defining and supporting next-generation stray light analysis within IEEE-P2020 and ISO.
Auto Exposure measurements in Color/Tone – Given a video input file with a changing light level, this feature will measure the time a camera system takes to adjust the exposure of a scene. Metrics calculated: Temporal Video Analysis – Mean Normalized Pixel Level, Exposure Error, and CPIQ Exposure Quality Loss.
Auto White Balance measurements in Color/Tone – Given a video input file with changing color temperature, this feature will measure the time a camera system takes to adjust the white balance of a scene. Metrics calculated: Correlated Color Temperature.
Compare two images for 3D (stereo imaging) compatibility in Focus Field – Compare the geometry of two images using the Focus Field Post-processor.
Enhanced Image Preview – Enabling zoom and pan with rubber band selection, coordinates display, and minimap.
Save distortion-corrected Image for SFRplus and Checkerboard

Minor Versions

v22.2.13 July 25, 2024

Resolved an error on save demosaiced rgb file as bmp from Rawview.
Combined image for signal averaging from ColorTone multi-file analysis is now saving from Frontrage UI too.
Dot Pattern: Fixes an issue analyzing monochrome images.
Resolved an auto-detection error in the Color/Tone Objective-C sample for IT.
Fix a parallel pool creation failure on macOS for the IT/python parallel_analyzer_example.py
Fixed issue related to finding more than the expected number of bars in an eSFR ISO wedge causing calculations to fail
Fixed the coordinate system of the Checkerboard “Central square X,Y pixel shift” values when an image crop is selected. The coordinate is now stable regardless of crop amount.
Windows Master and Studio uninstallers now remove the registry keys for the uninstaller.
Fixed normalization of image data in some edge cases
Fixed a crash that would occur when selecting Rescharts display “17. 3D image surface plot” when analyzing an image of a contrast resolution chart
Flatfield manual scaling: fixes documentation link
Rezchecker- add support for CPIQ exposure loss
Flatfield – Resolved Hot Pixel detection error.
Fixed flatfield analysis issue where “Optical center” text was only displayed when “Defective Pixels” measurement was turned on.
Fixed an access issue with the settings file for certain image acquisition devices in acquire_image.
Fixed an error in the C++ Stray Light sample
Fixed a crash during live acquisition in SFR and SFRplus.

v22.2.12 November 20, 2023

Fixed Arbitrary charts to detect distorted TE42 charts.
Checkerboard – 3D plots now save horizontal and vertical edge result plots.
Corrected the calculation of the “lightness uniformity” metric from the ISO 17957 shading standard.
Fixes the ability to combine multiple tga files for analysis
Resolved an error on save Color/Tone settings.
Updated Dynamic Range plotting pint with associated patch number.
Resolved a crash on Colortone with nonuniformity correction
Fix ‘row_major_interleaved’ array format by adding ‘row_major_interleaved_rgb’, ‘row_major_interleaved_bgr’, ‘row_major_interleaved_rgba’, ‘row_major_interleaved_bgra’ formats to be used in its stead.
Resolved a crash in ColorTone with rotated/mirrored images
Fixed a crash in the Flatfield Uniformity Settings window

v22.2.11 October 19,2023

Updated Blackmagic Decklink SDK version to 12.4.2
Corrected Y-Center shift values in checkerboard output.
Fixed an error on flatfield auto analysis with V&H spectrogram plot.
Updated aspect ratio iso 18844 flare image.

v22.2.9 August 16,2023

Enabled “Plot metric with respect to time” option for AWB/AE measurements in QA-62, TE269 and Dream Catcher 48
Dot pattern json “target_distance_units” updated correctly.
Falt field >Disabled the option read separate files in interactive mode.
Rescharts grayscale reference file selection saved for subsequent runs.

v22.2.8 July 13,2023

Corrected ROI selection display on output screen with IE TE276 random dead leaves cross analysis
Updated Dot pattern output with x,y vector data for displacement due to distortion, for each dot.
Added a warning prompt for cropping, if image center cannot be found due to distortion on SFRplus analysis
Resolved an error on IT parallel processing.

v22.2.7 June 09,2023

SFRplus- Resolved a crash on selection of ROI with bad edge fit.
Corrected blemish analysis settings dependency from previous run.
Updated reference file name displayed on eSFRiso color plot
Updated SFRplus ROI detections method.
Corrected checkerboard Ctr-Corner % distance in auto analysis.

v22.2.6 May 30,2023

Fixes issue when selecting multiple files on macOS.
Resolved an error on loading gray scale reference file in eSFRiso.
Stray light:
1. fixes issue where results are not saved to output folder.
2. warns users if they try to analyze a directory without a configuration file in it
3. fixes FITS output images, which were upside down

v22.2.5 April 20,2023

Resolved an error on Rescharts with acutance analysis
Added HSV color results to output files
Fixed “n extra reg marks” for eSFRiso.
Stray light:
1. Fixes logic utilizing plot settings.
2. Fixes typos in results (Percential -> Percentile).
3. Crash if out of storage space
4. Prevents crash if we cannot write a video to the provided directory.
5. Uncollapses the outputs settings window by default

v22.2.4 March 07,2023

Resolved an error on launching File Open Dialog on MacOS Ventura.
Secondary MTF Readouts corrected for Undemosaiced Images
“View last result json” button on arbcharts is functioning now.
Improved messaging for Stray Light Out of Memory
Resolved a crash when saving images from Imatest without explicitly stating a file extension.
Added logic for overwriting results files for straylight analysis.

v22.2.3 February 15,2023

Resolved Image acquisition crash when frame averaging selected.
Invalid stored image acquisition device settings now result in the display of a warning dialog in the Device Manager.
Resolved error on temporal noise analysis on flatfield
Resolved a noise plot error on ISO 15739 plots on ColorTone TE269.
OECF noise results are now in CSV and json.
Corrected flatfield center ROI mean calculation.
Fixes a crash in the PSNR calculation of SSIM where the reference and processed images are of different data types.
Fixes a crash saving result of a checkerboard where “fast geometry calc” is enabled.
SNR plot labels improved.
Fixed overlapping issue on flatfield plots.
Corrected oversharpening % in Arbitrary charts.
Fixed horizontal/vertical edge labels in json outputs for arbitrary charts.
Image height value limit validation is increased to 400 on CPIQ acutance settings.
Made the start up non-standard ini box non-modal

v22.2.2 December 22,2022

Resolved an error in time_domain_stats in ColorTone.
Updated Straylight normalization factor calculation.
On ColorTone module, allowed exposure error to go negative to indicate under exposure.
Resolved an error in matlab.internal.VideoReader/sortTimestampsAndBroadcastEvent on AWB
Resolved an error on Test Charts
Updated ROI selection on Star chart.

v22.2.1 November 04,2022

Improved trial behavior for Straylight – Warning message added when trying to save straylight files; and watermarks on plots.
Made an update on Straylight settings, which is now resetting when ini file resets.
Resolved error on saving a straylight plot if folder does not exist.
Corrected AWB&AE settling time start point.
IT python sample reworked to clarify library termination usage.
Added an error prompt on Straylight if filename has invalid characters.
Updated Japanese translations for Stray Light settings.
Resolved an error on Batchview post processor
Resolved a crash on IT/EXE with user defined chart
Removed “Normalized” and “count” units from Straylight results.
Resolved an error on Mac Studio build on saving test results as PDF form.

April 29, 2022

New Features

Automatic Chart Identification – Imatest will automatically identify the chart type when an image is uploaded, and an image analysis will be recommended, based on the chart type. Read more here.
Internationalization on New Main Window – Choice of 5 languages on the Imatest Master GUI: English, Japanese, Korean, Simplified Chinese, and Traditional Chinese.
New Resolution features to support ISO 12233 standards – New options allow improved analysis with algorithms that use 5th order polynomial fitting and Tukey window for analysis. Documentation for the new ISO 12233 calculations can be found here.
RegMark Detection Controls – Regmark detection for SFRreg images is significantly improved in situations of: low-contrast marks, blurry marks, high noise, or small targets. Read more
Display Sagittal/tangential MTF data – Option has been added to plot Sagittal/tangential MTF on the the Radial (lens-style) MTF plot.
Focus Field Postprocessor – New postprocessor allows user to compare how a lens performs at different distances, by analyzing a batch of files taken at various distances from the target. Find information and instructions here.
New Flatfield Target type – Flatfield combines the functionality of Uniformity and Blemish modules into a single analysis of nonuniformity, blemishes, defective pixels, ISO 18844 flare and EMVA1288-based measurements. Read more
Changes to Bayer frequency units and labeling – Spatial frequency scaling has been fixed for certain combinations of bayer frequency units and spatial frequency unit selections. The default bayer frequency units have been changed to “cycles per total pixels”. Details here.
OCR in Image Statistics – OCR images can now be analyzed in Image Statistics.

User Interface improvements

Tooltips for Analysis types, and Image Quality Factors
View full image filepath when hover mouse over image filename
Drag and drop support for analysis selection
Improved image preview/Zoom
Improved preview for multiple images
List view for Analysis types
Drop images on any tab (to add to image window)
Added number for favorites count

New Data Output Fields

New O/P value MTF JSON O/P to be displayed in the units selected in the MTF units “Display options”
Clipping % in JSON Output

Deprecated or Changed Features

Uniformity and Blemish analysis are now performed using the Flatfield target under the Uniformity/Blemish analysis category.
There are new options for Sharpness calculations, to comply with ISO 12233 standards. Full details are here.
Bayer Frequency units and labeling have been changed for some unit selections. Read more about change details here.
Due to the addition of Flatfield, any IT tests that previously used Uniformity or Blemish should change to use Flatfield functions instead (see below).

C++: flatfield_shell()

.NET: Imatest.IT.FlatField

python: ImatestLibrary.flatfield()

Imatest users who previously used Uniformity or Blemish will now be using the Flatfield target. The Imatest INI file will need to be updated to reflect this change.

Known Issues

Flat field json output file – the following fields are missing- “mean_pixel_level_RGBY” and “pixel_std_dev_RGBY” (these will be added in 22.1.1)
Flat field analysis is missing Flatfield_histograms plot
Some strings are not yet translated for Internationalization
MacOS IT – Debugging of IT Libraries will not work on Apple Silicon

Bug Fixes in this Release

Resolved an issue with Noise plot in eSFR ISO and 36patch DR
Fixed crashes in Studio when saving data
Uniformity json % values – now are shown in % values (values 0 – 100)
Fixed a crash simulating Bayer images with a non-integer gamma.
Fixed an error in Stepchart module when analyzing Auto Exposure
Fixed outputs when MTF frequency units are Cycles/Object inch

Minor Versions

v22.1.11 August 16,2023

Falt field – Disabled the option read separate files in interactive mode.
Dot pattern json “target_distance_units” updated correctly.
Fixes bug where ISO 18844 results were not saved.
Rescharts grayscale reference file selection saved for subsequent runs.
Resolved an error on IT parallel processing.

v22.1.9 June 20,2023

Corrected ROI selection display with TE276 random dead leaves cross analysis.
SFRplus- Resolved a crash on selection of ROI with bad edge fit.
Resolved an error on loading gray scale reference file in eSFRiso.
Corrected blemish analysis settings dependency from previous run.
Fixed “n extra reg marks” for eSFRiso.
Fixes issue when selecting multiple files on macOS
Added Dot Pattern distortion vector data in output.
Updated SFRplus ROI detections method.
Fix an issue that prevented report generation for IT/python.

v22.1.8 April 03,2023

Resolved a crash when saving images from Imatest without explicitly stating a file extension.
Resolved an error on SFR grayscale patches with non-uniformity correction.
Resolved error on temporal noise analysis on flatfield
Resolved an error launching File Open Dialog on MacOS Ventura.
“View last result json” button on arbcharts is functioning now.
Secondary MTF Readouts corrected for Undemosaiced Images
Fixed an issue that prevented installation on macOS.
Added HSV color results to output files

v22.1.7 February 08,2023

Invalid stored image acquisition device settings now result in the display of a warning dialog in the Device Manager.
Resolved a noise plot error on ISO 15739 plots on ColorTone TE269.
Corrected flatfield center ROI mean calculation.
Resolved an error on Test Charts
Fixes a crash in the PSNR calculation of SSIM where the reference and processed images are of different data types.
Fixes a crash saving result of a checkerboard where “fast geometry calc” is enabled.
SNR plot labels improved.
Fixed overlapping issue on flatfield display plots.
Corrected oversharpening % in Arbitrary charts.
Fixed horizontal/vertical edge labels in json outputs for arbitrary charts.
Image height value limit validation removed on CPIQ acutance settings.
Made the start up non-standard ini box non-modal

v22.1.6 November 14,2022

Resolved an error on Batchview post processor.
Corrected “Mean camera chroma %” calculation for RezChecker
Updated Center shift-y value on SFRplus Json output.
Updated ShaferFilechck file to treats HyperV as a physical machine so that license server will identify machines correctly.
Resolved an error on Mac Studio build on saving test results as PDF form.

v22.1.5 August 30,2022

SFR auto-focus plot: Updated code to plot different lines with different colors and added legend
Resolved an error on saving SFR results
Resolved an error on using reload function when analyzing an image in interactive mode

v22.1.4 July 21, 2022

Checkerboard – Updated ROI position when fiducial marks are detected.
Rezchecker – Resolved an error on Temporal noise analysis.

v22.1.3 July 11,2022

Resolved an issue with Memory leak in IT/python.
Removed extra python interpreter installations for macOS and Linux.
Resolved an issue with Autoexposure in Stepchart module due to ng32 value being too high.
Resolved an error with UVC (usb video class driver) image acquisition.
Focus field : Implemented warning messages for missing Focal length/Aperture instead of throwing error.
Fixed license manager shortcut missing error.

v22.1.2 May 25,2022

Resolved an error in Stepchart on auto exposure analysis.
Corrected patch order for RezChecker custom color reference files.
Rezchecker: Fixed the difference in value for Temporal Noise SNR in CSV and Json files
SFR: Resolved a crash on changing MTF plot units to LW/Crop Height.
Imatest Master version 22.1.2 provides a utility to migrate the settings for blemish and uniformity in the INI file to Flat field settings.

If you have been using Uniformity, or Blemish in pre-22.1 Imatest versions, and you wish to migrate your current settings to Flat field settings, you should use this procedure. If you wish to use the default Flat field settings, no action is required.

This migration utility can be run from the new Imatest main window, or from the Classic UI. Directions for running the utility both ways are given below.

- Via New main window

1. Choose any image uniformity file
2. Choose Flatfield interactive
3. Click the Analyze button
4. On flatfield analysis window, choose “INI File Settings” -> “Update from pre-22.1 INI”, and confirm that you want to migrate settings. Prior to migration, a backup is taken of the current ini file.

- Via classic imatest

1. Select flatfield interactive
2. Press cancel when asked to select an image
3. On flatfield analysis window, choose “INI File Settings” -> “Update from pre-22.1 INI”, and confirm that you want to migrate settings. Prior to migration, a backup is taken of the current ini file.

More about this migration utility:

Settings will be migrated over from the previous Uniformity and Blemish sections, to create the Flatfield settings. In the case of conflicting settings, Blemish settings will be given priority. The migrated settings will be saved in the current INI file. As part of settings migration, a log file will be created that lists which settings were migrated, and if there were any conflicts. The backup and log files will be located in the folder where your ini file is located. You will receive a message at the end of migration that gives the exact name and location of the log and backup files.

v22.1.1 May 12,2022

eSFRiso: Fixed an error on multiwedge summary plot with wedge option unchecked.
macOS IT Obj C Flat Field: sample image file name corrected.
Resolved autodetection failure for Color/Tone on Mac OS IT.
Resolved a crash on Focus field with empty secondary readout.
Resolved a crash on Focus field when no data on selected edge type.
Resolved .NET Parallel Analyzer sample missing image file error.
Flat field auto analysis: Fixed a crash on studio build.
Fixed an error on IT C++ CPP_Test.

November 17, 2021

New Features

New Main Window interface including advanced User Interface, and Dark Mode
Random/spilled coins texture calculation option and calculation for regions that are smaller than ideal
Distortion Contour plots for Checkerboard Output
Color/Tone Detection of Veiling Glare mask for contrast resolution target
Color/Tone option for MATLAB Colorchecker detection routine
New SFRplus pass/fail for gamma and ISO 15739 Dynamic Range
Image Statistics 1 Dimensional FFT plot
Save results automatically opens results folder
Improved Interface for acutance measurements

New Data Output Fields

L*U*V* Value in JSON summary data when using Color/Tone Module
Dot pattern centers for red and blue channels in outputs
Add ROI spatial coordinates to the JSON output of Color/Tone Modules
User-entered/custom CPIQ viewing conditions with corresponding acutance and Quality Loss results.

Deprecated Features

dcraw has been deprecated – functionality is replaced by LibRaw
Removal of “AGC 16 bit MTF file” setting, replaced by “Lighten 16+ bit image display” and “Bayer RAW bit shift” (allows more flexible bit shift settings)

Known Issues

No foreign language translation in the New Main Window (use Classic UI for non-English language choices).
Arbitrary Charts and Stepchart – analysis does not use pre-selected image (asks for image during Analysis – use Classic UI to avoid this issue)
Error Report prompt may not be shown when module is called from New Main Window

Minor Versions

v2021.2.13 July 20, 2023

Added the field “snr_dB_ISO15739_at_13pct_Lref” in ISO 15739 json export.
Fixed Objective-C color\Tone sample hang issue.
Added HSV color results to output files
Fixes issue when selecting multiple files on macOS.
Resolved an error on IT parallel processing.

v2021.2.12 March 16, 2023

Resolved build installation issue on Mac OS.

v2021.2.11 March 10, 2023

Resolved an error launching File Open Dialog on MacOS Ventura.
Invalid stored image acquisition device settings now result in the display of a warning dialog in the Device Manager.
Secondary MTF Readouts corrected for Undemosaiced Images
Resolved an error on SFR grayscale patches with non-uniformity correction.
OECF noise results are now in CSV and json.
“View last result json” button on arbcharts is functioning now.
SNR plot labels improved.
Resolved a crash when saving images from Imatest without explicitly stating a file extension.
Corrected oversharpening % in Arbitrary charts.
Fixed horizontal/vertical edge labels in json outputs for arbitrary charts.

v2021.2.9 December 08,2022

Resolved an issue with Noise plot in eSFR ISO and 36patch DR
SFR auto-focus plot: Updated code to plot different lines with different colors and added legend
Fixed upgrade installer issue by correcting NSIS installer MCR download reference file name
Resolved an error on Batchview post processor
Resolved an error on saving SFR results
Corrected “Mean camera chroma %” Calculation for RezChecker
Updated Center shift-y value on SFRplus Json output.
Resolved a crash on IT/EXE with user defined chart
Updated ShaferFilechck file to treats HyperV as a physical machine so that license server will identify machines correctly.
Resolved an error on Mac Studio build on saving test results as PDF form.
Resolved an error on Test Charts

v2021.2.8 July 25,2022

Resolved an issue with Memory leak in IT/python.
Checkerboard – updated ROI position when fiducial marks are detected
Rezchecker: Fixed the difference in value for Temporal Noise SNR in CSV and Json files
Rezchecker – Resolved an error on Temporal noise analysis.
SFR: Resolved a crash on changing MTF plot units to LW/Crop Height.
Resolved an error with UVC (usb video class driver) image acquisition.
Fixed error in license manager, where it had a missing shortcut.
Resolved an issue with Autoexposure in Stepchart module.

v2021.2.7 May 16,2022

Fixed outputs when MTF frequency units are Cycles/Object mm and Cycles/Object in
Rezchecker: Fixed the difference in value for Temporal Noise SNR in CSV and Json files
SFRreg: resolved a crash with no regions selected, to skip SFR analysis.
Fixed crashes on studio build when saving data.
Resolved an issue with Noise plot in eSFR ISO and 36patch DR
Resolved a crash on Random Dead Leaves module
Fixed save screen issue with Uniformity module
Color/Tone: Fixed an error on changing SNR plot to Lux
eSFRiso: Third noise viewing condition can be defined now.
Wedge analysis: Resolved a crash due to bad ROI selection.
Braw shift setting on GUI updated with INI change

v2021.2.6 March 25,2022

Resolved an error in stepchart when it is analyzing auto exposure
Test Charts: deprecated Contrast Resolution chart option(pattern #29)
36 patch Dynamic Range – resolved registration mark detection crash
CC24 – Resolved a crash on correction matrix
Resolved a crash on CC24 on selecting display patch numbers on split colors display plot
Corrected the help link on checkerboard settings

v2021.2.5 March 11,2022

Improvements in Bayer frequency units and labeling
- Changed the default “bayer frequency unit” setting (corresponds to the “bayerFrequency” INI option) from 1 to 2 such that the default bayer frequency unit is now “cycles per total pixels” instead of “cycles per channel pixels”.
- Bayer frequency setting now properly saves to the INI for all relevant modules
- Grayed out “bayer frequency unit” dropdown unless “LW/PH”, “LP/PH”, “LW/CH”, or “LP/CH” spatial frequency units are selected (limits the effect of “bayer frequency unit” option to only image-size-related spatial frequency units)
- Changed the labeling of spatial frequencies such that only image-size-related spatial frequency units get the special “total” or “channel” labeling scheme (all other spatial frequencies will always use the standard FrequencyUnits enumeration class)
- Corrected the spatial frequency scaling for certain combinations of bayer frequency units and spatial frequency units selections (bayer raw SFR results have been corrected)
- Read more about how Imatest handles Bayer Raw images here.

Omnivision: resolved crash due to connection error.
Resolved an error on eSFRiso analysis with stepchart calculation.
Updated Json outputs for SFR, eSFRiso, SFRreg, SFRplus, and Checkerboard with selected MTF units.
Stepchart – resoved and error when reference file does not exist in the directory.
IT – Display an appropriate message when an incorrect Opmode is selected by the user.

Added gray shaded region to the Stepchart f-stop noise plot to make the Stepchart plots consistent with the color/tone f-stop noise chart.

SFR/SFRplus – Corrected MTF plot scaling with “show edge crop & MTF” option for images analyzed as bayer.
Added Arbitrary charts analysis support on new GUI.

v2021.2.4 February 09,2022

Checkerboard – updated geocal fiducial mark detection to avoid an out of bound crash
Color/Tone – Resolved a crash on saving output data.
Resolved an issue with UVC (usb video class driver) connection.
Resolved a crash on SFRreg on an SFRplus image which doesn’t have any well-detected regions
Log frequency – Resolved a crash on save data.
Updated windows Master shortcut in install directory; is now pointing to run_imatest.bat
Updated sfr.exe on Imatest IT to strip white space from file path
Resolved a problem in generating reports for IT/Exe runs on Checkerboard/ColorTone and Dotpattern modules
Resolved the error on reading raw images

v2021.2.2 January 24, 2022

Fixed bug where PDF and HTML reports were not saved in IT.
Fixed issue where IT/EXE Color/Tone interface was not mapping multiple image paths to color_tone.m’s interface correctly. (Similar issue fixed for Star, Random and Wedge interfaces.)
Pass/Fail settings – Added options for parameters: MIA TV distortion limits (SMIA_TV_distortion_limits), Minimum SNR_BW , and Minimum Y_SNR_dB_except_ends. See https://www.imatest.com/docs/passfail/#sfrplus for a full list of Pass/Fail options.
Random Dead Leaves: Resolved a crash due to out of bound ROI selection.
Wedge Feature: improved Wedge calculations; added ability to analyze Logarithmic Wedges.
Resolved an issue with date/time when activating Master.
IT: Resolved an issue with python connection and Blemish tests in the .NET test suite.
Star Chart module: – user selected MTF Units are now honored in the CSV or JSON reports.
SFRplus: Resolved a crash on using direct image acquisition mode.
Color/Tone:- fixed the option to change ROI after reload.
Contrast resolution chart: Resolved a crash with bayer raw settings.
SFRplus: Resolved an error that caused an unrecognized field “spacing”.
Colorcheck: VideoReaderUI “plot metric with respect to time” is now enabled in new interface.
Resolved an issue on switching chart type and image on Rechart window with new interface.
eSFRiso: Resolved an error on Wedge MTF display on changing channel from Luminance to any mean options.
Fixed Labview wrapper library license error.

v2021.2.1 December 17, 2021

Welcome window will now appear on new installation.
Resolved error encountered when trying to analyze a video.
Resolved issues with Stepchart – Linear Grayscale Analysis.
Resolved error with Color/tone General mxn analysis.
Resolved issue – now when analyzing more than one image at a time, the images can be in different folders.
Focus Score: Improved acquire image from device option, and resolved crash on reloading
Wedge measurement: Resolved rendered black issue of vertically oriented wedges
TestManager:- Resolved crashes on creating capture session and image capture data entries to db
Uniformity: Resolved a crash trying to do a 6×4 region grid
DotPattern: Resolved a crash if no dots are found
Removed direct camera acquisition from Studio version
Color/Tone – Fixed issue where changing Interactive settings (mxn values) did not update auto settings
Documentation: Fixed incorrect paths in the IT readme file.

April 22, 2021

Features

Improved Display Alignment for Device Manager — Provides enhanced user capabilities for aligning test charts – including crosshairs, circle, and gridline display.
Edge tracking during live focusing in Imatest Master— Improved performance and stability when adjusting focus during live image acquisition.
Rescharts Focus Score Plus — Enables real-time auto WB, focus, and exposure measurements on any image region.
CPIQ v2 Exposure Quality Loss Calculation. Calculation of Exposure Metric which determines the effect of over or underexposure on perceptual quality. Available on Colorchecker-24 and Colorchecker-SG charts through the Color/Tone module. Using units of Just Noticeable Differences (JND).
OpenEXR HDR format support — Imatest now supports reading OpenEXR images. This allows customers to use high dynamic range images.
LibRaw Next Generation RAW decoder — The successor to DCRaw offers additional camera support.

Minor Features

macOS Big Sur Support.
Allow 16-bit and custom defective pixel entry – Blemish hot/dead pixel thresholds can be changed to allow for 16-bit data.
Improved Speed and Accuracy for Wedge calculations – Wedge calculations have been improved to be faster and more accurate and have improved frequency estimates.
Test charts can generate PNG bitmap files of vector charts.
Uniformity Module 4×6 Grid Selection
Color/tone and Stepchart Modules enable the user to enter the saturation level, instead of it being fixed at 255. The Saturation level field now has a 4th option to allow user to enter an integer for a custom saturation level.
Improved annotation of saturation in noise plot
Checkerboard loosened requirement for dot locations in small images.
Uniformity/blemish Modules improved hot/dead pixel detection especially for averaged 8-bit images
Color/tone annotations remain visible during reloads
Additional Data Outputs in JSON files:
- Checkerboard output of detected rows/columns
- Color/Tone Module provides output of Chroma SNR and Kelly_Keelan outputs
- Output of interpolated MTFs for all ROIs and all color channels in non-SFR runs. JSON fields MTFinterp1, MTFinterp2, MTFinterp3, MTFinterp4 will now have one row entry per slanted-edge ROI, whereas previously each only had one entry which corresponded to the last ROI.
- SFR MTF interp json outputs are now Row Vectors. MTFinterp1, …, MTFinterp4 fields in JSON outputs from SFR Module in Rescharts will now be a row, instead of a column.
- SFR JSON outputs are the same as SFRplus
- Optional output of diffraction-limited MTF (mtf_diff_ltd_freq) to CSV/JSON outputs
- SFRplus output of Magnification to CSV/JSON file
- Color/Tone module output of CPIQ Exposure quality loss metric
Speed Improvements
- Uniformity module displays – slight speed improvement
- Focus score speed improvement
- Image acquisition speed improvement

Deprecated Features

Push Interface – The Push Interface has been removed from Imatest Master. Please migrate any Push Interface integration to Imatest IT.

Minor Versions

v2021.1.15 July 03, 2023

Resolved a crash when saving images from Imatest without explicitly stating a file extension.
Added the output field “snr_dB_ISO15739_at_13pct_Lref” in ISO 15739 json export.
Added more libraries to common_conflicting_libaries.m
SNR plot labels improved from overlapping
Handling of missing or invalid image acquisition device settings.
Secondary MTF Readouts corrected for Undemosaiced Images.
Fixed Objective-C color\Tone sample hang issue.

v2021.1.14 January 25, 2023

Resolved an error in time_domain_stats in ColorTone.
Resolved an error on saving SFR results.
Updated Center shift-y value on SFRplus Json output.
Resolved a crash on IT/EXE with user defined chart
Updated ShaferFilechck file to treats HyperV as a physical machine so that license server will identify machines correctly.
Resolved an error on Mac Studio build on saving test results as PDF form.
Resolved an error on Test Charts.
Resolved a display issue on windows OS

v2021.1.13 August 16, 2022

Fixed Incorrect AutoFocus plot, when plotting metric with respect to time
Resolved an issue with Memory leak in IT/python
Rezchecker – Resolved an error on Temporal noise analysis
Resolved an error with UVC (usb video class driver) image acquisition.

v2021.1.12 June 21,2022

Resolved an issue on macOS that was causing Master and Studio to freeze, and IT runs to crash due to libcudart.dylib..

v2021.1.11 May 23,2022

Omnivision: resolved crash due to connection error
Fixed outputs when MTF frequency units are Cycles/Object mm and Cycles/Object in
Test Charts: deprecated Contrast Resolution chart option(pattern #29)
Stepchart – resoved and error when reference file does not exist in the directory.
SFR: Resolved a crash on changing MTF plot units to LW/Crop Height.
Resolved an issue with Noise plot in eSFR ISO and 36patch DR
SFRreg: resolved a crash with no regions selected, to skip SFR analysis.
Fixed crashes on studio build when saving data.
CC24 – Resolved a crash on correction matrix
Fixed save screen issue with Uniformity module
SFR/SFRplus – Corrected MTF plot scaling with “show edge crop & MTF” option for images analyzed as bayer
Color/Tone: Fixed an error on changing SNR plot to Lux
Resolved a crash on CC24 on selecting display patch numbers on split colors display plot

v2021.1.9 February 11,2022

Improvements in Bayer frequency units and labeling
- Changed the default “bayer frequency unit” setting (corresponds to the “bayerFrequency” INI option) from 1 to 2 such that the default bayer frequency unit is now “cycles per total pixels” instead of “cycles per channel pixels”.
- Bayer frequency setting now properly saves to the INI for all relevant modules
- Grayed out “bayer frequency unit” dropdown unless “LW/PH”, “LP/PH”, “LW/CH”, or “LP/CH” spatial frequency units are selected (limits the effect of “bayer frequency unit” option to only image-size-related spatial frequency units)
- Changed the labeling of spatial frequencies such that only image-size-related spatial frequency units get the special “total” or “channel” labeling scheme (all other spatial frequencies will always use the standard FrequencyUnits enumeration class)
- Corrected the spatial frequency scaling for certain combinations of bayer frequency units and spatial frequency units selections (bayer raw SFR results have been corrected)
- Read more about how Imatest handles Bayer Raw images here.
Resolved an issue with date/time when activating Master
Checkerboard – updated geocal fiducial mark detection to avoid an out of bound crash
Device Manager -Resolved issues with GenICam/GigE vision Setup and UVC (usb video class driver) connection
Updated IT/EXE Color/Tone interface, is now mapping multiple image paths to color_tone.m’s interface correctly
Resolved a problem in generating reports for IT/Exe runs on Checkerboard/ColorTone and Dotpattern modules
Contrast resolution chart- Resolved a crash with bayer raw settings
Dead Leaves- Resolved a crash due to out of bound ROI selection
Resolved a crash on dot detection with vanilla settings and no cropping
Resolved a crash on analyzing video on eSFR ISO when edge ROI is occluded
eSFR ISO- Resolved an error on Wedge MTF display on changing channel from Luminance to any mean options.
Focus Score -Improved acquire image from device option, and resolved crash on reloading
Image Processing – resolved a crash on selecting detect people on a monochrome image
Log frequency – Resolved a crash on save data.
Resolved a crash on launching Log-F contrast
SFRplus – Resolved a crash on using direct image acquisition mode
Resolved a crash on SFRreg on an SFRplus image which doesn’t have any well-detected regions
Added gray shaded region to the Stepchart f-stop noise plot to make the Stepchart plots consistent with the color/tone f-stop noise chart
Wedge measurement – Resolved rendered black issue of vertically oriented wedges
Resolved an error in iso17957 calc in uniformity module
Fixed Labview wrapper library license error
Updated sfr.exe on Imatest IT to strip white space from file path
IT: Resolved an issue with python connection and Blemish tests in the .NET test suite
Resolved an issue on opening *.fig files from imatest in matlab
Resolved error on adding new capture session on database

v2021.1.8 November 17,2021

Uniform interactive:- resolved an error on temporal noise measurement.
Omnivision: resolved a crash due to connection error.
Stepchart: resolved a flat response with SNR.
Corrected Quality Based DR calculation on Color/Tone Tone-mapped 36-Patch dynamic range w/ grey level compression.
Fixed the python installer directory issue on Linux
Colorchecker chart :- resolved an issue in vertical direction analysis.
Random/Dead Leaves :- Improved the slider performance in ROI settings window.
Resolved an issue with CR chart and Color/Tone with 2 or 4 images on Temporal analysis.
Removed blank options under Bit shift for uint8 or uint16 output pixel size images. Now, when the output pixel size is changed, the bit shift value is held constant and the index is changed.
Used alternative pop up within bayer_calc to indicate that image has already been bit shifted due to AGC 16 bit MTF files setting.
Improved autobatch execution.
Color Difference Visualizer:-resolved an issue on selecting File:Save/display screen menu.
Radial geometry :- resolved an issue on resizing large image display.
Multi-image Tiff :- resolved a crash on selecting non .tiff file

v2021.1.7 October 27,2021

Uniformity Shading plot max and min are now added to CSV.
Resolved Sampling theorem crash in Educational Apps.
Resolved an issue when reports are saved in a read only location.
Improved Checkerboard detection to accurately capture “part way” regions.
Resolved a misleading “ROI is too small” when running a Dead Leaves image.
Resolved an issue in Read Raw when the INI file has more than 16 space-separated entries for [rdraw].
Resolved a crash on Interactive modules due to IsContrastRes function.

v2021.1.6 October 04, 2021

Resolved an error that occurred after a misleading “Bad ROI selection” error message when running a CC24 chart image via the Color/Tone module.
Resolved an issue when attempting to Load Color Matrix from Clipboard via the Color/Tone Interactive module.
Resolved an issue that caused the weighted mean averages in eSFR ISO Auto to be the same when running batch images.
An appropriate message is displayed and the user is prompted to use Tunable Target detection when ROI selection fails via Checkerboard.
Resolved an issue with SFRplus when the tonal response is plotted with a Bayer Raw image.
Fixed a crash when using MATLAB demosaicing via uniformity Interactive.
Resolved an issue in the Dead Leaves module that caused a misleading “ROI too small” error when testing a TE 276 V2 chart.

v2021.1.5 September 22, 2021

Resolved an issue with uniformity interactive when “maximum” value is removed from the contour scaling settings window.
CSV reference file density is ready accordingly in eSFR ISO Module.
Histograms in Slanted-edge modules display updates accordingly when use for MTF is checked

v2021.1.4 August 27, 2021

Resolved a rendering issue in the Device Manager when connecting an Omnivision Panther T device.
Resolved a crash with Checkerboard Auto
Resolved a blocker issue with date/time when activating Master
Fixed an issue with lighting control asking to install otool
Fixed eSFR ISO third noise viewing condition crash when selected

v2021.1.3 August 5, 2021

Resolved a crash with eSFR ISO Auto when handling cropped images.
Fixed a crash with Checkerboard Tunable target detection when Min and Max pixel values are changed.
Resolved a crash with the Test manager when editing a test plan.
Color/Tone module: added a warning that the SNR values may be unreasonably high when they fall off the plot.
Fixed a crash with the Lighting Control module.
Resolved an issue with ParallelAnalyzer not attaching subsequent INI files

v2021.1.2 July 20, 2021

Fixed an issue that caused an image extension error when ‘filecomb’ is set to 1in the INI file.
Resolved a crash when radial geometry is opened from another program.
Resolved an issue that caused the dynamic range to have negative values.
Fixed a crash that occurred when the probe is unselected in Color/Tone Display#3.
Fixed the Uniformity module grid plot labels when saving the CSV output.
Resolved an issue with the Uniformity module when selecting a small ROI.

v2021.1.1 June 7, 2021

Fixed a crash in Checkerboard Auto when distortion calculations are turned off.
Resolved an issue that caused .TIF image to crash in Uniformity Interactive module.
Fixed an issue with the Blemish module when a Bayer Raw image is read.
Fixed an issue that incorrectly caused ROI_mult field to popular more ROIs than user selected.
Resolved an eSFR ISO wedge crash when loading monochrome image with “Analyze as Bayer”.
When eSFR ISO detection fails, the user is now prompted to manually select their registration marks instead of just saying “Registration marks too close to Edge”.

October 1, 2020

Features

Improvement in calculation speed — Enhanced real-time acquisition and analysis speed. Up to 6x increase in the speed of slanted-edge SFR calculations, especially when acquiring directly from supported cameras. Significant improvement in speed of other types of analysis. Speedup depends on camera resolution.
Uniformity statistics based on EMVA 1288 — Calculates Spatial and Temporal noise, Dark Signal Nonuniformity (DSNU), Photoresponse Nonuniformity (PRNU) and total SNR. Vertical and horizontal spectrograms and profiles show statistical distributions of the image.
Uniformity measurements from ISO 17957:2015 – Generates shading measurements for luminance nonuniformity. More details.
Imatest IT for Mac OS — Brings the functionality of Imatest IT to Mac OS users. Includes Objective-C , Python, and EXE interfaces.
Tunable Checkerboard Detection — A new interface allows users to set tuning parameters for detection of Checkerboard targets. Checkerboard detection can now achieve detection over the whole field of view, where previous versions only found a rectangular subset of target points.

Minor Features

Illumination Nonuniformity from Slanted Edge Modules – Calculates mean levels for slanted-edge ROI, which shows non-uniformity due to lens shading and nonuniform illumination. Works with all slanted edge modules.
Lighting Control 2-channel 16-bit DMX Control for Kino Flo Lights – Provides increased precision for fine tuning light levels on supported 16-bit lights.
Rescharts Display Improvements – Additional contour lines to 2D and multi-ROI summary and expanded viewing area for 3D plots.
Uniformity – Display of temporal noise image. For more information, read Uniformity display options.
YUV420 and YUV422 Raw support
SFRreg Tunable parameters – There is a new interface for users to set tuning parameters for detection of SFRreg charts.
Option to choose between TE269V2 (new chart) and TE269 (old version) in the ROI options menu.
Ability to Convert batches of Bayer Raw images in Rawview.
Added the ability to remove pedestal prior to decompanding
Additional Help – A new help interface explains menus and sections of the main window.

Minor Versions

v2020.2.16 October 31, 2022

Resolved an error on Rezchecker Temporal Noise measurement.
Fixed upgrade installer issue by correcting MCR download reference file name.
Resolved an error with UVC (usb video class driver) image acquisition.
Resolved Read Raw error on Mac OS.
Updated ShaferFilechck file to treats HyperV as a physical machine so that license server will identify machines correctly.
Resolved an error on Mac Studio build on saving test results on PDF form.

v2020.2.15 May 26, 2022

Omnivision: resolved crash due to connection error
Corrected patch order for RezChecker custom color reference files.
Fixed outputs when MTF frequency units are Cycles/Object mm and Cycles/Object in
Rezchecker: Fixed the difference in value for Temporal Noise SNR in CSV and Json files
Test Charts: deprecated Contrast Resolution chart option(pattern #29)
Stepchart – resoved and error when reference file does not exist in the directory.
SFR: Resolved a crash on changing MTF plot units to LW/Crop Height.
Resolved an issue with Noise plot in eSFR ISO and 36patch DR
SFRreg: resolved a crash with no regions selected, to skip SFR analysis.
Fixed crashes on studio build when saving data.
CC24 – Resolved a crash on correction matrix
Fixed save screen issue with Uniformity module
Color/Tone: Fixed an error on changing SNR plot to Lux
Resolved a crash on CC24 on selecting display patch numbers on split colors display plot

v2020.2.14 February 15, 2022

Improvements in Bayer frequency units and labeling
- Changed the default “bayer frequency unit” setting (corresponds to the “bayerFrequency” INI option) from 1 to 2 such that the default bayer frequency unit is now “cycles per total pixels” instead of “cycles per channel pixels”.
- Bayer frequency setting now properly saves to the INI for all relevant modules
- Grayed out “bayer frequency unit” dropdown unless “LW/PH”, “LP/PH”, “LW/CH”, or “LP/CH” spatial frequency units are selected (limits the effect of “bayer frequency unit” option to only image-size-related spatial frequency units)
- Changed the labeling of spatial frequencies such that only image-size-related spatial frequency units get the special “total” or “channel” labeling scheme (all other spatial frequencies will always use the standard FrequencyUnits enumeration class)
- Corrected the spatial frequency scaling for certain combinations of bayer frequency units and spatial frequency units selections (bayer raw SFR results have been corrected)
- Read more about how Imatest handles Bayer Raw images here.

Fixed java resolution for 2020.2 and prior

IT: Resolved an issue with python connection and Blemish tests in the .NET test suite

Checkerboard – updated geocal fiducial mark detection to avoid an out of bound crash
Resolved a crash on analyzing video on eSFR ISO when edge ROI is occluded
Log frequency – Resolved a crash on save data.
Device Manager -Resolved issues with GenICam/GigE vision Setup and UVC (usb video class driver) connection
SFRplus – Resolved a crash on using direct image acquisition mode
Added gray shaded region to the Stepchart f-stop noise plot to make the Stepchart plots consistent with the color/tone f-stop noise chart
Contrast resolution chart- Resolved a crash with bayer raw settings
Fixed Labview wrapper library license error
Resolved a problem in generating reports for IT/Exe runs on Checkerboard/ColorTone and Dotpattern modules
Dead Leaves- Resolved a crash due to out of bound ROI selection
Resolved a crash on SFRreg on an SFRplus image which doesn’t have any well-detected regions
Image Processing – resolved a crash on selecting detect people on a monochrome image
Updated IT/EXE Color/Tone interface, is now mapping multiple image paths to color_tone.m’s interface correctly
SFR – Corrected the Overshoot value discrepancy between cy/pxls and lw/ph csv files

v2020.2.13 December 15, 2021

Resolved an issue when reports are saved in a read only location.
Resolved an issue in Read Raw when the INI file has more than 16 space-separated entries for [rdraw].
Corrected Quality Based DR calculation on Color/Tone Tone-mapped 36-Patch dynamic range w/ grey level compression.
Fixed the python installer directory issue on Linux
Removed blank options under Bit shift for uint8 or uint16 output pixel size images. Now, when the output pixel size is changed, the bit shift value is held constant, and the index is changed.
Omnivision: resolved crash due to connection error
Stepchart: resolve a flat response with SNR
Resolved an error on loading ini file with multiple ROIS
Wedge measurement: – Resolved rendered black issue of vertically oriented wedges
TestManager:- Resolved crashes on creating capture session and image capture data entries to db
Colorchecker chart :- resolved an issue in vertical direction analysis
Multi-image Tiff :- resolved a crash on selecting non .tiff file
Random/Dead Leaves :- Improved the slider performance in ROI settings windows
Improved autobatch execution
Resolved an issue on trying to reference a file that is not defined
Focus Score:-Improved acquire image from device option, and resolved crash on reloading
Uniformity:-Resolved a crash trying to do a 6×4 region grid
Resolved an issue on launching *.fig files from imatest in matlab
DotPattern:-Resolved a crash if no dots are found
Fixed a crash plotting histogram in find sharpest files if all files have the same sharpness

v2020.2.12 October 13, 2021

Resolved a rendering issue in the Device Manager when connecting an Omnivision Panther T device.
Resolved an issue with uniformity interactive when the “maximum” value is removed from the contour scaling settings window.
CSV reference file density are ready accordingly in the eSFR ISO Module.
Histograms in Slanted-edge modules display updates accordingly when use for MTF is checked.
Resolved an error that occurred after a misleading “Bad ROI selection” error message when running a CC24 chart image via the Color/Tone module.
Resolved an issue when attempting to Load Color Matrix from Clipboard via the Color/Tone Interactive module.
Resolved an issue that caused the weighted mean averages in eSFR ISO Auto to be the same when running batch images.
An appropriate message is displayed and the user is prompted to use Tunable Target detection when ROI selection fails via Checkerboard.
Resolved an issue with SFRplus when the tonal response is plotted with a Bayer Raw image.
Fixed a crash when using MATLAB demosaicing via uniformity Interactive.
Resolved an issue in the Dead Leaves module that caused a misleading “ROI too small” error when testing a TE 276 V2 chart.
Uniformity Shading plot max and min are now added to CSV.
Improved Checkerboard detection to accurately capture “part way” regions.

v2020.2.11 August 20, 2021

Resolved a crash with eSFR ISO Auto when handling cropped images.
Fixed a crash with Checkerboard Tunable target detection when Min and Max pixel values are changed.
Resolved a crash with the Test Manager when editing a test plan.
Color/Tone module: added a warning that the SNR values may be unreasonably high when they fall off the plot.
PAralleAnalyzer now attaches subsequent INI files.
Fixed ‘timesec’ is not recognized error.
Fixed connection issue that hindered devices to be connected to the Device Manager.
Resolved an issue preventing users from reading in multi-image TIFF files.
Fixed a crash with Uniformity when ROI selected is too small
Fixed tunable detection in Checkerboard when changing pixel min and max values.
Resolved a crash with noise sub-display in eSFR ISO

v2020.2.9 July 8, 2021

Fixed an issue with the Blemish module when a Bayer Raw image is read.
Fixed an issue that incorrectly caused ROI_mult field to popular more ROIs than user selected.
When eSFR ISO detection fails, the user is now prompted to manually select their registration marks instead of saying “Registration marks too close to Edge”.
Fixed an issue that caused an image extension error when filecomb is set to 1in the INI file.
Resolved a crash when radial geometry is opened from another program.
Resolved an issue that caused the dynamic range to have negative values.
Fixed a crash that occurred when the probe is unselected in Color/Tone Display#3.

v2020.2.8 May 12, 2021

Resolved a crash that was caused when Rescharts is selected.
Resolved a bug in Pass/Fail that caused “all_tests_passed” to always pass despite having metrics that failed.

v2020.2.7 May 3, 2021

Resolved a crash with Color/Tone Auto when running a linear grayscale image.
Fixed a crash trying to plot an improperly formatted decompanding file.
Resolved a crash when switching to Log F module from Focus Score in Recharts.
Resolved a crash when switching to SFRreg module from SFR in Recharts.
Fixed a Rescharts crash after using another module and then using Star.
Resolved a crash when switching to Wedge module from Log F in Rescharts.
Fixed a crash in raw view.
Resolved DR display with monochrome images in Color/Tone module.
Resolved a bug that caused a crash in the Random/Dead Leaves module.
Resolved a crash in SFRplus when selecting a standard color reference from the More settings window.
Resolved a crash in Color/Tone auto when CCM is selected.

v2020.2.6 April 1, 2021

Resolved a crash with Colorcheck module when testing rotated images.
Resolved an issue with Composite charts when attempting to construct a 1×12 linear step chart.
Resolved inconsistent row/column-major ordering of CCM outputs in Color/Tone module.
Changing the gamma now impacts the ISO 18844 flare calculation in Uniformity module.
Fixed the order of the Color chart Density and SNR CSV values when testing general mxn charts in Color/Tone Interactive.
Resolved patch order variation with visual noise calculation when saving the CSV.
Fixed a crash when displaying lightened ROIs in the SFRplus module.
Fixed a crash that occurred when changing the DR Units to Lux (DR EV) in Color/Tone module, Noise display.
Fixed a crash when selecting a directory for saving multi ROI SFR outputs.
Fixed a bug reading a badly formatted INI file.
Fixed crash when trying to change a custom INI after the previous custom INI was deleted.
Resolved an issue that caused the Uniformity Interactive b* (in CIELAB values) to incorrectly averages to 0 in the CSV and grid plot display.
Crash trying to plot a decompanding curve in Read Raw.
Fixed a crash when canceling the reading of a CCM in the Image Processing module.
Fixed a crash after pasting a CCM.
Resolved a crash with eSFR ISO when wedges analysis is selected in a chart that lacks them.
Resolved an issue causing Distortion module to crash when the wrong chart type was selected.
Resolved a crash when switching from SFRplus to eSFR ISO via Rescharts

v2020.2.5 February 23, 2021

Resolved a crash with the Checkerboard module when setting the similarity response margin below 1 in the target detection settings.
Fixed an issue that caused PDF reports to crash on Mac OS.
Resolved an issue with the Uniformity grid contour display, that caused the values in that caused the results to be incorrectly transposed.
Resolved a crash with monochrome images when tested via the Checkerboard module.
More helpful message is now displayed when attempting to activate a newer version when out-of-support.

v2020.2.4 February 10, 2021

Resolved an issue with the Colorcheck module when attempting to measure Auto white balance with a mirrored chart.
Uniformity interactive bug resolved when “single region” is selected under grid size in the settings window.
Resolved an issue that caused a crash when dot pattern detection fails due to using a defective chart
CSV and JSON MTF outputs from SFR now go to maximum plot frequency.
A warning message now appears when trying to save the screen before a chart has been analyzed.
Fixed a crash that was caused when grayscale patches are missing from an eSFR ISO Chart when attempting to calculate noise in eSFR ISO Setup.
Resolved a crash in SFRPlus when changing the geometric settings.
Fixed a crash in the SFRplus Setup summary display, when attempting to change the Channel.
Fixed a crash when accessing Color/Tone settings from the main GUI toolbar.

v2020.2.3 January 18, 2021

A new checkbox was added to the Colorcheck and Color/Tone modules that causes the embedded colorspace in the image to overwrite saved settings only if checked.
Resolved a discrepancy between Secondary readout and MTF plot when using cycles/degrees units in SFR.
Resolved an issue with eSFR ISO setup when reading an image with a bad crop.
Resolved an SFRreg crash when speedup not being enabled.
Custom defective pixel entry is now allowed in Blemish detect.
Resolved an issue that caused histograms of 16bit images to be presented as 8 bits in the Uniformity Interactive module.
Read raw settings window prompts accordingly when a monochrome image is read via the Image statistics module.
Fixed an issue with eSFR ISO module when batch images are tested and color patch analysis is turned on.
User capture settings are now saved using the operator console.
Edge ID now keyed to the center of detected circles.
Resolved a bug that was caused after canceling out of a QPCard chart selection in Color/Tone Auto module.
Resolved a crash that was caused when reading a Bayer Raw image via the SFR module.
Checkerboard circle detection near the center (circles) is accurately detected.
Resolved a crash in the Wedge module (under Rescharts)

v2020.2.2 November 25, 2020

Settings were not correctly returned to their original state when selecting ‘Cancel’ from the Setup window in Rescharts.
PDF reports can be saved accordingly via Rescharts and Color/Tone modules.
Fixed issue with “multi-region CSV” so that the 3rd order distortion coefficient does not end up in the same cell as TV distortion.
Fixed crash in Stephchart chart selection window when selecting “Last reference” when no previous file had been selected.
Fixed a bug that hindered eSFR ISO Setup[ results to appear after the ROI selection stage.
Contrast and rotation settings are now honored in SFRreg module.
Adjusting the Viewing Condition (px/cm) in Color/Tone module is honored in the next run.
Fixed crash that could happen when entering certain blurSignma values in Checkerboard target detection settings.
Fixed an error causing a crash when users attempt to copy an image in checkerboard using File>Copy Image.
Resolved an issue with SFRplus that affected detection with monochrome images.
Users can now adjust corners, fill factor and distortion in Color/Tone eSFR ISO grayscale and Color module.
Resolved an inaccurate clipping warning sign with Reschart module.
32 bit depth output is generated accordingly via Read Raw.
Fixed an issue that cased a crash when reading a bad decompanding JSON file in Read Raw.
Resolved a crash when trying to run high bit depth images through checkerboard.
Resolved gamma discrepancy between Colorcheck and Color/Tone modules
Fixed as issue when INI file is moved or deleted from the current directory.
An appropriate warning is issued when a user tries to select an ini file that doesn’t exist or has been moved.
Users are no longer accidentally able to select ROIs that extend beyond the boundary of the image.

v2020.2.1 October 12, 2020

Fixed a crash in Image Processing when the user tried to save an image when one had not been loaded.
Exceptions are handled more robustly when an error is thrown in IT C#.
Users should now be able to re-open Lighting Control while a DMX controller is connected.
Updated operator console to include missing identifiers.
Fixed a bug preventing users from displaying more than 3000 ROIs on a checkerboard.
Increased the minimum size of detected SFRreg target ROIs to 9px on all sides, preventing crash that could happen with erroneously detected small regions.
Entering comma numbers for blur sigma in Checkerboard Target detection settings counts as a decimal. For e.g. 3,5 now counts as 3.5.
Fixed an issue with Checkerboard detection that putputted 1e-06 when 0 is entered in Response Threshhold
Updated Linux Mex files that are expected with newer Ubuntu versions.
Resolved noise display issue when reading ideal patches via Color/Tone module as a general mxn chart.
Resolved an issue with contour 3d plot when displayed through the SFRPlus module.
Resolved an issue that hindered batch runs in Imatest Studio (<=8) in SFR and SFRplus modules.
Settings were not correctly returned to their original state when selecting ‘Cancel’ from the Setup window in Rescharts.
Fixed inadequate ROI selection when only vertical or Horizontal edges are selected when using an edge ID file with SFR Plus.
Only one target detection setting window can be created at a time.

March 17, 2020

Features

Lighting Control — Set up and control DMX lights (Kino Flo) and Lightboxes as well as monitor lighting conditions with an Isolight puck directly from Imatest using tools specifically designed with image quality testing in mind. This feature enables you to manage the brightness and color temperature of individual lights and save your settings to scenes which allows you to perform rapid switching between light configurations.
Shannon Information Capacity — Measure the Shannon information capacity of imaging systems in units of bits per pixel from sinusoidal Siemens star patterns. Because frequency-dependent signal and noise are measured from the same locations on the star, they are subject to identical image processing, unlike slanted-edge MTF and flat patch-based noise measurements. Details in The white paper, “Camera information capacity: a key performance indicator for Machine Vision and Artificial Intelligence systems“

Minor Features

New CCM Linearization Option — Calculate the linearization parameters from the grayscale patches on the target. Results are more accurate than previous methods. (The previous Color Correction Matrix [CCM] calculation, derived from images of color charts [including grayscales], generally required knowledge of the gamma [Opto-Electric Conversion Function] curve of the image for proper linearization.)
MATLAB Compiler Runtime Library — Add Mac OS Catalina Support, decrease build size.
Read Raw module updates:
- decompanding JSONs now accept a simpler “kneepoint form” definition.
- 14-bit MIPI unpacking now available.
- 32-bit image data can now be written out.
Software Analytics – This helps us understand the usage patterns of license holders. When you opt in to share usage data with us, we can learn which areas of the software are used most often, which will help us improve our support and offer new licensing options.

Removed or deprecated items

Standardized sharpening (MTF Corr) has been deprecated.

Minor Versions

v2020.1.18 May 06, 2022

Fixed outputs when MTF frequency units are Cycles/Object inch
SFR – Corrected the Overshoot value discrepancy between cy/pxls and lw/ph csv files
Resolved an error on saving data on Log Frequency
Fixed crashes in Studio when saving data
eSFRiso: Resolved an error on noise plot
Resolved error on switching reschart module from Focus score to Log frequency and from Log frequency to Star chart
Log FC: Resolved an error on display plot “4.MTF/contrast (2D pseudocolor contour)”
Resolved a bad cancel handling issue with Image Stats module.

v2020.1.17 February 04, 2022

Fixed an issue with the Blemish and eSFR ISO module when a Bayer Raw image is read.
Resolved a crash on analyzing video on eSFR ISO when edge ROI is occluded
Resolved a crash on finding sharp files among eSFR ISO images
SFR: – Resolved a crash on saving multi tiff files
Resolved a crash on updating SFRreg target detection pixel min and max values
Fixed an issue that caused an image extension error when filecomb is set to 1 in the INI file.
Color/Tone module: added a warning that the SNR values may be unreasonably high when they fall off the plot.
Resolved an error that occurred after a misleading “Bad ROI selection” error message when running a CC24 chart image via Color/Tone module.
Resolved an issue when attempting to Load Color Matrix from Clipboard via Color/Tone Interactive module.
Fixed issue where IT/EXE Color/Tone interface was not mapping multiple image paths to color_tone.m’s interface correctly
Fixed a crash that occurred when the probe is unselected in Color/Tone Display#3.
Resolved an issue that caused the dynamic range to have negative values.
Resolved SafeFile error on saving data for Checkerboard when folder can not be written.
Resolved an autodetection failure on Checkerboard
An appropriate message is displayed and user prompted to use Tunable Target detection when ROI selection fails via Checkerboard.
Fixed an issue that incorrectly caused ROI_mult field to populate more ROIs than user selected.
Dead Leaves: -Fixed an issue with ROI size when testing a TE 276 v2 chart
Resolved an issue with Uniformity interactive when “maximum” value is removed from the contour scaling settings window.
Uniformity: -Updated csv result with missing grid plot labels
Resolved a crash on running SSIM on a standard Blemish image
IT: Resolved an issue with python connection and Blemish tests in the .NET test suite
Resolved an issue in Read Raw when the INI file has more than 16 space-separated entries for [rdraw].
Fixed java resolution for 2020.2 and prior
Updated lightingControl with new JRE
Fixed an error on adding device to Database
Restore silent install functionality
Fixed Labview wrapper library license error
Resolved a crash when trying to save PDF/HTML output to a read-only location
eSFRiso: resolved a crash on selecting third view point on noise settings
Updated commands for new Isolight Puck firmware for carriage return

v2020.1.15 April 29, 2021

Resolved a crash with monochrome images when tested via the Checkerboard module.
A more helpful message is now displayed when attempting to activate a newer version when out-of-support.
Resolved a crash with the Colorcheck module when testing rotated images.
Changing the gamma now impacts the ISO 18844 flare calculation in the Uniformity module.
Fixed the order of the Color chart Density and SNR CSV values when testing general mxn charts in Color/Tone Interactive.
Resolved patch order variation with visual noise calculation when saving the CSV.
Fixed a crash when displaying lightened ROIs.
Fixed a crash that occurred when changing the DR Units to Lux (DR EV) in Color/Tone module, Noise display.
Fixed a crash when selecting a directory for saving multi ROI SFR outputs.
Fixed a bug reading a badly formatted ini file.
Fixed crash when trying to change a custom INI after the previous custom INI was deleted.
Resolved an issue that caused the Uniformity Interactive b* (in CIELAB values) to incorrectly averages to 0 in the CSV and grid plot display.
Fixed a crash when canceling the reading of a CCM in the Image Processing module.
Fixed a crash after pasting a CCM.
Resolved a crash with eSFR ISO when wedges analysis is selected in a chart that lacks them.
Resolved an issue causing the Distortion module to crash when the wrong chart type was selected.
Resolved a crash with Color/Tone Auto when running a linear grayscale image.
Fixed a crash trying to plot an improperly formatted decompanding file.
Fixed a crash in raw view.
Resolved DR display with Bayer Raw files in Color/Tone module.
Resolved a bug that caused a crash in the Random/Dead Leaves module.
Resolved a crash in SFRplus when selecting a standard color reference from the More settings window.

v2020.1.14 February 12, 2021

Resolved an issue that caused a crash when dot pattern detection fails due to using a defective chart.
Fixed a crash that was caused when grayscale patches are missing from an eSFR ISO Chart when attempting to calculate noise in eSFR ISO Setup.
Resolved a crash in the Wedge module.
Fixed crash that would happen when running Wedge-only analysis in Rescharts.
Resolved a crash in SFRPlus when changing the geometric settings.
Fixed a crash in SFRplus Setup summary display, when attempting to change the Channel.
Fixed a crash when accessing Color/Tone settings from the main GUI toolbar.
Fixed an issue that caused PDF reports to crash on Mac OS.

v2020.1.13 January 21, 2020

A warning message now appears when trying to save the screen before a chart has been analyzed.
Resolved a discrepancy between Secondary readout and MTF plot when using cycles/degrees units in SFR.
Edge ID now keyed to the center of detected circles.
Resolved an issue with eSFR ISO setup when reading an image with a bad crop.
Resolved an SFRreg crash when speedup not being enabled.
Read raw settings window prompts accordingly when a monochrome image is read via the Image statistics module.
Fixed an issue with eSFR ISO module when batch images are tested and color patch analysis is turned on.
User capture settings are now saved using the operator console.
Resolved a bug that was caused after canceling out of a QPCard chart selection in Color/Tone Auto module.
Resolved a crash that was caused when reading a Bayer Raw image via the SFR module
Checkerboard circle detection near the center (circles) is accurately detected.
Resolved an issue with the Colorcheck module when attempting to measure Auto white balance with a mirrored chart.
Resolved a crash in the Wedge module (under Rescharts).
CSV and JSON MTF outputs from SFR now go to maximum plot frequency

v2020.1.12 November 30, 2020

Exceptions are handled more robustly when an error is thrown in IT C#.
PDF reports can be saved accordingly via Rescharts and Color/Tone modules.
Increased the minimum size of detected SFRreg target ROIs to 9px on all sides, preventing crashes that could happen with erroneously detected small regions.
Updated Linux Mex files that are expected with newer Ubuntu versions.
Resolved noise display issue when reading ideal patches via Color/Tone module as a general mxn chart.
Fixed a bug preventing users from displaying more than 3000 ROIs on a checkerboard.
Resolved an issue with contour 3d plot when displayed through the SFRPlus module.
Resolved an issue that hindered batch runs in Imatest Studio (<=8) in SFR and SFRplus modules.
Settings were not correctly returned to their original state when selecting ‘Cancel’ from the Setup window in Rescharts.
Fixed issue with “multi-region CSV” so that the 3rd order distortion coefficient does not end up in the same cell as TV distortion.
Fixed crash in Stephchart chart selection window when selecting “Last reference” when no previous file had been selected.
Adjusting the Viewing Condition (px/cm) in the Color/Tone module is honored in the next run.
Fixed an error causing a crash when users attempt to copy an image in checkerboard using File>Copy Image.
Resolved a crash when trying to run high bit depth images through checkerboard
Users can now adjust corners, fill factor, and distortion in the Color/Tone eSFR ISO grayscale and Color module.
Resolved an inaccurate clipping warning sign with Reschart modules.
32-bit depth output is generated accordingly via Read Raw.
Fixed an issue that caused a crash when reading a bad decompanding JSON file in Read Raw.
Resolved gamma discrepancy between Colorcheck and Color/Tone modules.
Fixed an issue when INI file is moved or deleted from the current directory.
An appropriate warning is issued when a user tries to select an INI file that doesn’t exist or has been moved.
Users are no longer accidentally able to select ROIs that extend beyond the boundary of the image.

v2020.1.11 October 12, 2020

The device manager no longer crashes when a device is not connected and “start preview” is selected.
Fixed eSFR-ISO Setup button redirecting to SFR module analysis.
Resolved an issue that hindered eSFR ISO from running on Studio.
Fixed a bug preventing users from displaying more than 3000 ROIs on a checkerboard.
Resolved an issue with chromatic aberration display that caused a consistent output when an unknown Bayer Raw configuration is set.
Fixed a crash in Image Processing when the user tries to save an image when one had not been loaded.
Fixed a crash that would happen if trying to save non-8-bit image data in JPEG format in Rescharts.
Fixed crash when trying to access reference values in Rescharts from some cases where they were not available.
Rebuilt dcraw to decode *.CR3 files.
Resolved an issue in SFR reg when resetting plot selection in the settings window.
Fixed a crash that could happen when very bad checkerboard regions were found with the new detector.

v2020.1.9 September 23, 2020

License agreement (EULA) can be accessed from the help toolbar in Master.
Checkerboard Auto saves the results accordingly when ROI selection is set to none.
Removed erroneous Rawview window menu item “Open file in Readraw”.
Resolved a crash when selecting submitting image capture data via Test Manager.
Resolved an issue that hindered the Database module from starting.
Resolved a crash in Uniformity module when measuring ISO 18844 flare.
Resolved an issue that hindered saving JPEG images of 16-bit data via SFRplus.
Rebuilt Dcraw to decode *.CR3 files.

v2020.1.8 September 2, 2020

Resolved an issue with display thumbnails in Rescharts module.
Changed Raw view layout. The former Save button now says “Save settings”.
Resolved an issue that hindered image acquisition via Omnivision.
Resolved an issue with Orientation tag in the EXIF data.
Resolved an issue with Lighting Control that hindered lightboxes/panels from responding.

v2020.1.7 August 13, 2020

Resolved an issue with Colorcheck when attempting to measure Auto White Balance.
Resolved an issue with Checkerboard Auto when loading an image with Distortion turned off.
TE269 tonal response display issue resolved when the chart is tested via Color/Tone.
Resolved an issue with the SFR module when MTF plot units are set to ’10. LW/Crop Height’.
Color correction matrix bug resolved with demosaiced JPG images.
Resolved a crash with standard monochrome images when tested via Checkerboard Auto.
Color/Tone issue resolved when reading a Colorcheck 24 image.
Fixed a crash when the help toolbar is used to access the “MTF Curves & Appearance” page.
Fixed incorrect patch-index ordering fields “grayscale_OECF_patch_number” and “Patch_number” in eSFR-ISO Module’s JSON outputs.
Resolved a bug with Multi-Wedge summary display in eSFR ISO module when changing the readout.

v2020.1.6 July 29, 2020

Dead/Leaves Random module bug fixed when a chart with an incorrect configuration is read in.
The “FILEROOT_MTF.csv” file is now created in Imatest IT using Reschart supported modules.
Changing units in the x-axis via Color/Tone Auto when plotting Dynamic Range, is now maintained.
IT crash resolved when running an eSFR ISO center chart image in SFRreg then in eSFR ISO modules, respectively.
Resolved an issue with SFR module when MTF plot units are changed to “LW/Crop Height”.
Fixed a bug when JSON files are saved using a general mxn (1×1) via Color/Tone Module.
Fixed a bug when CSV files are saved using a general mxn (1×1) via Color/Tone Module.
Resolved an issue with Python Parallel Processing that caused the INI file to not be found.
Test Chart issue resolved when creating a file that is too large for the system to write.
Resolved an issue with Read Raw when negative “bitshift_first” values are entered in the decompanding file.
Fixed a bug that caused a crash when running an image in the Star (Fixed) module.
Added a TE269 selector in ROI options that allow you to choose between the new (V2) and old versions of the charts.
Chroma Color difference for saturation was added to JSON output in Color/Tone.

v2020.1.5 July 10, 2020

Resolved an issue with Rawview when reading a BMP image.
Resolved an issue with Image Statistics module when an Image is resized.
Bug fixed in OIS/Image Compare module when loading 3 JSON files.
Fixed an issue with decompanded uint32 bit files that caused them to saturated when converted in Read Raw.
Resolved an issue with Color/Tone Interactive when adjusting the noise settings.

v2020.1.4 July 1, 2020

Read Raw handles uint32 decompanded output (uint 16 input) more effectively when White Level is set to None.
Resolved a bug in Color/Tone Auto when EXIF Data display is selected in the Settings Window.
Resolved a crash in Read Raw when loading an INI file with inappropriate characters.

v2020.1.3 June 24, 2020

Resolved an issue that hindered signal averaging with 32bit files.
Fixed a bug that caused the Uniformity module to crash when using the crop boundaries to adjust the ROI.
The image processing module provides the option to save images in 8bit or 16bit depth.

v2020.1.2 June 8, 2020

Waitforallfigures closed error that contaminated Colorcheck Module on Windows machine is now resolved.
Summary mean values for slanted-edge metrics no longer report NaN if any of the summaries. were valid. NaN will still be reported if all values being summarized were NaN (typically meaning they were not calculated because of missing data).
Fixed requirement for “pedestal” field in decompanding JSONs introduced in 2020.1.1. This field is now optional.
Resolved a crash prior to the ROI selection stage in Random/Dead Leaves (Fixed) Module.
Resolved an issue with the Batchview module when the path directory to the CSV is altered.
Resolved a crash with Color/Tone Module when reading a tilted Colorcheck24 image.
Improved performance of 3D plots in Color/Tone Interactive.
Resolved bug with JSON output producing 0’s when generated via eSFR ISO Module.
Resolved a bug that caused a crash when running a IT8.7 image via Color/Tone.
Pedestal subtraction is now allowed prior to decompanding via Read Raw Settings.
Slanted Edge Angle is now provided in the JSON output of Reschart auto-detect modules.
Ding on completion of Find Sharpest File module is active again.
ROI homogeneity field “mean_ROI_level” is provided in the JSON output of Reschart auto-detect modules.
The “radial limit” option now eliminates dead pixels when adjusted via the Blemish Detect module.
Acquisition.dll file included back in IT image acquisition library.

v2020.1.1 April 17, 2020

Resolved an issue with Pixel Shift reporting as NaNs in the Checkerboard module.
20-patch eSFR ISO reference file runs as expected when read in Color/Tone Interactive module as an eSFR ISO Color Gray Scale.
Fixed the order of the grayscale patches in the JSON output of the Colorchecker24 chart when analyzed in the Color/Tone module.
Resolved an issue with eSFR ISO that hindered the interpolated f and MTF CSV values from changing.
Allowed temporal noise analysis using multi-images in IT.
Fixed a bug that caused LAB reference files to be misread in color/tone interactive.
Resolved a bug in eSFR ISO when selecting a reference file that doesn’t exist.
Resolved an issue that hindered device manager from running on Catalina.
Prevented Edge ID file crash when V&H ROI edges are selected in the Checkerboard Setup Module.
Resolved an eSFR ISO bug when stepchart analysis is selected.
Fixed error that occurred in Arbitrary Charts module when using Black Circle registration marks, introduced in 2020.1.0.
Resolved an issue with reference files via Color/Tone module when the “Last file (none)” option is selected.
Resolved an issue in Star (Fixed) module when reading a Bayer Raw image.
User has the option to apply Pedestal subtraction prior to decompanding in Read Raw Settings.
Fixed a crash when Shannon Capacity plot is displayed in Star (Rescharts) module.
Gradient Display in Checkerboard Setup is fixed when the Distortion plot is selected.

September 12, 2019

Features

ON Semiconductor DevwareX – support for this advanced image sensor interface software, which replaces Devware. Support for the APbase image acquisition API.
Decompanding – for the proper processing of piecewise linear (PWL) companded RAW files, which can extend sensor dynamic range by allowing different tonal curves for ranges of digital output values.
Contrast Detection Probability (CDP) – from Contrast Resolution chart using low-contrast path triplets to calculate the draft IEEE P2020 metric. CDP is a metric for the distinguishability from two input light levels through an imaging system.
Improved Color/Tone Module Interfaces – Chart selection is clearer and more robust.
Color/Tone Setup is the new name for Multicharts (interactive).
Color/Tone Auto is the new name for Multitest (fixed).
Hyperbolic Wedge and Siemens Star – analyses are now supported in Arbitrary Charts.
Dynamic Range (DR) Output Resistance to Flare Light – We can now detect conditions where flare light causes exaggerated DR measurements and can remedy the misleading measurements by limiting the quality-based DR to the slope based DR, which is defined by the scene density where the patch pixel-level stops decreasing.
INI File Monitor – produces detailed reference information about the effects of settings changes on the Imatest INI file.
Checkerboard Uniformity Calculations – produce summaries of nonuniform illumination similar to those produced by SFRplus.
Image Statistics Mesh Plot – produces a 3D view of spatial pixel-level information.
Arbitrary Charts – allows user control to guide the detection of black-circle registration marks.

Minor Features

Find sharpest files plot – to show focus score metric across multiple images.
Faster bilateral filtering in Image processing module.
Image acquisition Improvements – FLIR camera interfaces, GenICam upgraded, performance improvement for the acquisition of RGB frames, Dalsa Driver Upgrade, ORCA-Flash4.0 camera upgrade
Chart MTF Suitability Display – as part of the chart quality calculator, this shows the quality level relative to sensor size and vertical field of view.
Logging Levels – offer the ability to control the display and logging of different levels of messages from Imatest software: error, warning, info, and debug.
Bayer Frequency Units – previously when we would analyze a bayer RAW format we would do 4:1 downsampling while retaining the same pixel size. A new option in more settings enables cycles per total pixels or channel pixels to be selected.
Dcraw – Updated to Version 9.28 that adds support for Canon EOS 5D Mark IV.
Improve Handling of High Bit Depth RAW and HDR Files by improving the lightening feature during region selection.
Edge Spread Function Plots respect the selected spatial frequency units, previously it would always be in cycles/pixel.
Minor change to black-circle registration mark detection preset thresholds in Arbitrary Charts.

Removed or deprecated items

- Print Test been deprecated.
- XML output deprecated; use JSON instead.
- Geometric Calibration has been removed from Master and IT. This tool available in the 5.1 release is reserved for customers of Imatest’s total HW+SW solution. Contact us for details.
- The distortion button shrunk and will be deprecated in a future release.
- Colorcheck and Stepchart will receive no future enhancements and will be deprecated in a future release. (Color/Tone Setup and Color/Tone Auto are recommended for all new work, apart from bug fixes.)
- Multicharts and Multitest were renamed to Color/Tone Setup and Color/Tone Auto.
- Autofocus consistency is deprecated; it remains available in 4.5-5.

Minor Versions

v5.2.21 February 21, 2021 (final 5.2 release)

Fixed an issue with the SFR module when analyzing an image as Bayer
Resolved a bug that was caused after cancelling out of a QPCard chart selection in Color/Tone Auto module.

v5.2.19 January 18, 2021

Increased the minimum size of detected SFRreg target ROIs to 9px on all sides, preventing a crash that could happen with erroneously detected small regions.
Adjusting the Viewing Condition (px/cm) in Color/Tone module is honored in the next run.
Fixed an error causing a crash when users attempt to copy an image in checkerboard using File>Copy Image.
Resolved an inaccurate clipping warning sign with Reschart module.
32-bit depth output is generated accordingly via Read Raw.
Users are no longer accidentally able to select ROIs that extend beyond the boundary of the image.
Resolved a discrepancy between Secondary readout and MTF plot when using cycles/degrees units in SFR.
Resolved an issue with eSFR ISO setup when reading an image with a bad crop.
Read raw settings window prompts accordingly when a monochrome image is read via the Image statistics module.
PDF reports can be saved accordingly via Rescharts and Color/Tone modules.
User capture settings are now saved using the operator console.
Resolved a crash that was caused when reading a Bayer Raw image via the SFR module
Checkerboard circle detection near the center is accurately detected.

v5.2.18 October 8, 2020

Removed erroneous Rawview window menu item “Open file in Readraw”.
Removed erroneous Rawview window menu item “Open file in Readraw”.
Resolved a crash when selecting submitting image capture data via Test Manager.
Resolved an issue that hindered the Database module from starting.
Resolved an issue that hindered saving JPEG images of 16-bit data via SFRplus.
Rebuilt Dcraw to decode *.CR3 files.
Device manager no longer crashes when a device is not connected and “start preview” is selected.

v5.2.17 August 24, 2020

Fixed a bug when JSON files are saved using a general mxn (1×1) via Color/Tone Module.
The crash when loading a monochrome image with the Checkerboard module (auto) is resolved.
Test Chart issue resolved when creating a file that is too large for the system to write.
Resolved an issue with Colorcheck when attempting to measure Auto White Balance.
Resolved an issue with Checkerboard Auto when loading an image with Distortion turned off.
TE269 tonal response display issue resolved when the chart is tested via Color/Tone.
MTF plot units to ’10. LW/Crop Height’
Resolved a crash with standard monochrome images when tested via Checkerboard Auto
Resolved an issue with display thumbnails in Rescharts module.
Changed Raw view layout. The former Save button now says “Save settings”.
Resolved an issue that hindered image acquisition via Omnivision.
Resolved an issue with the orientation tag in the EXIF data.

v5.2.16 July 28, 2020

Resolved a bug in Color/Tone Auto when EXIF Data display is selected in the Settings Window
Resolved a crash that resulted in an error when loading an INI file with inappropriate characters.
The “FILEROOT_MTF.csv” file is now created in Imatest IT using Reschart supported modules.
Changing units in the x-axis via Color/Tone Auto when plotting Dynamic Range, is now maintained.
Resolved a bug with Multi-Wedge summary display in eSFR ISO module when changing the readout.
IT crash resolved when running an eSFR ISO center chart image in SFRreg then in eSFR ISO modules, respectively.
Resolved an IT issue that caused license manager to crash.
Fixed a bug that caused a crash when running an image in the Star (Fixed) module.

v5.2.15 June 25, 2020

Waitforallfigures closed error that contaminated Colorcheck Module on Windows machine, is now resolved.
Summary mean values for slanted-edge metrics no longer report NaN if any of the summaries were valid. NaN will still be reported if all values being summarized were NaN (typically meaning they were not calculated because of missing data).
Resolved a crash prior to the ROI selection stage in Random/Dead Leaves (Fixed) Module.
Resolved a crash with Color/Tone Module when reading a tilted Colorcheck24 image.
Improved performance of 3D plots in Color/Tone Interactive.
Resolved bug with JSON output producing 0’s when generated via eSFR ISO Module.
Slanted Edge Angle is now provided in the JSON output of Reschart modules (that support autodetection).
Ding on completion of Find Sharpest File module is active again.

v5.2.14 April 15, 2020

Resolved an issue with Pixel Shift reporting as NaNs due to small center of detection radius in the Checkerboard module.
Fixed the order of the grayscale patches in the JSON output of the Colorchecker24 chart when analyzed in the Color/Tone module.
Resolved an issue with eSFR ISO that hindered the interpolated f and MTF CSV values from changing.
Resolved an issue that caused eSFR ISO Setup Module to crash upon ROI selection.
Resolved an issue that caused the Checkerboard Module to crash upon ROI selection.
Fixes block present in 5.2.13 which might prevent a run of a single image in Color/Tone (Fixed) Module if temporal noise calculations were selected.
Corrected ordering of grayscale patches in results of Colorchecker 24 analysis run through Color/Tone Module in Imatest IT. Issue was present in 5.2.13.
Resolved an eSFR ISO bug when stepchart analysis is selected.
Allowed temporal noise analysis using multi-images in IT.

v5.2.13 April 6, 2020

20-patch eSFR ISO reference file runs as expected when read via Color/Tone Interactive module as an ‘eSFR ISO Color Gray Scale’ chart.
Resolved an issue with Imatest Studio when being installed in Mac OS 10.13 (High Sierra).
If set by the user, Blemish figures close automatically when generated.
Resolved an issue that caused the SSIM module to crash when reading an image.

v5.2.12 March 25, 2020

Resolved a bug that caused the Uniformity module to crash.
Read Raw is friendly with 32-bit containers.
Fixed an IT issue when attempting to save plots via the Star module.
IT & Pass/Fail settings populate Color/Tone Auto fields as set by the user.
Fixed a crash in Noise plot using eSFR ISO Setup.
Fixed a crash with dead leaves cross chart due to inadequate ROI selection.
Updated ‘Dead pixels’ labels in CSV the reports when generated via Blemish.
Windows that didn’t produce crash error reports previously, now will.
Suppressed “Escaped character ‘\U’ is not valid” warning.
Resolved an SFRreg crash when tiny marks in the image are being mistaken for real registration marks.
Fixed a bug when an 11^th order polynomial is selected to measure distortion in the Checkerboard Module.
Fixed an issue with the generation of Grid plot data when generated via Blemish.
Find Sharp File error resolved when “Sort plot by name” is selected.
Fixed a crash with Star Module when “MTF contours (polor)” display is selected.
Slanted edge light/dark values are parsed in the JSON via any of the Rescharts module.
Fixed old labels in Imatest IT settings that still reference multitest.
Fixed a crash when 3D plots display is selected in Checkerboard Setup.
Fixed a crash in Checkerboard Setup that was caused by a corrupted INI field.
Minor bug fix when saving reports via Checkerboard.
Resolved Edge ID discrepancy in the JSON files generated by Reschart modules.
Fixed a crash when running a completely black image in Stepchart.
Test Charts bug fixed when the save is canceled upon generating a chart.
Prevented a crash when Checkerboard experimental detection is selected.
Resolved a bug when the noise display is selected in SFRreg.

v5.2.11 February 18, 2020

Resolved a crash that hindered users from running the Star (Fixed) Module
Fixed an issue that caused a crash upon reading *.raw extension directly (using any supported module) when Read Raw setting is set to output 32bit containers.
HTML & PDF Reports from the Uniformity module now display the image
Fixed an issue that caused the Batchview module to crash upon reading a CSV
Fixed an issue that caused Batchview to crash after changing the names of one of the folders in the CSV directory path.
Amending fields under the “optional parameters” in the Checkerboard Setup settings window will not crash.
Uniformity Module (Fixed) generates HTML and PDF reports separately, without the need to include >CSV reports.
Fixed a bug that caused the SFR (Rescharts) module to crash when JSON is saved
Fixed issue with Linux installers when ran from a directory with spaces in the path.
Fixed bug that didn’t allow SFR (educational apps) to run.

v5.2.9 January 31, 2020

Switched the erroneously reversed “Cy/Channel Pixels” and “Cy/Total Pixels” labels for Bayer image frequency unit scaling.
Common container types (8-bit, 16-bit, 32-bit) are expanded accordingly based on the decompanding file parameters. For example, previously when decompanding 16-bits to 20-bit the data would remain in a 16-bit container, while now it will return 20-bit data in a 32-bit container.

v5.2.8 January 8, 2020

Fixed problem that caused eSFR ISO Auto to crash on a bad wedge.
Improved detection of color and grayscale areas.
Improved SFRplus detection on all the inner and boundary edges
Fixed uniformity interactive crash upon saving JSON and CSV data
Fixed an error in calculating mean star MTF.
Fixed maximum display frequency in Star module
Inclusion of plots for eSFR ISO multi-wedge
Prevent a crash in Batchview module
Fixed issue with corrupt license files

v5.2.7 December 23, 2019

Reference files in the eSFR ISO transmissive chart now account for density differences between the patches when used for the DR measurement.
Fixed error that hindered users from selecting a custom grayscale reference file in eSFR ISO More settings window.
Fixed an error that prevented Noise plots from being displayed in eSFR ISO Module
Fixed an error that caused eSFR to crash with monochrome images when the “Step chart” box is checked.
Resolved an error that prevented PCs with NVMe drives from running on Master
eSFR-ISO and SFRplus data file output won’t crash when grayscale patches weren’t detected in an image.
Circle-registration-mark detection threshold in Arbitrary Charts can be customized by the user, instead of being based on the image size to the image width.

v5.2.6 December 9, 2019

Resolved stepchart detection issue in Pass/Fail for eSFR ISO pattern.
Fixed Device Manager crash on MacOS 10.14.6.
Fixed crash in Multi-wedge plot in eSFR-ISO module.
Hide arbitrary charts-related buttons from main window in Studio.
Temporal noise (2-image method) outputs from Color/Tone now have Y-channel temporal noise values.
Backporting changes to VM users when their internet connection is displayed (related to error message -4304)

v5.2.5 November 8, 2019

Resolved floating license error (Error -4303) that misleadingly appeared with node-locked licenses.
Fixed an error that prevented eSFR ISO Color & grayscale chart from being analyzed in Color/Tone Auto.
Fixed autodetection issue when reading an EIA chart via Color/Tone Auto.
Misleading error message “Licensing library not found at ShaferFilechck.dll’” is only displayed when there is a license related issue.
Fixed SFRreg detection issue with markers outside the normal crop region.
DNG files are read through dcraw accordingly, when loaded in any analysis modules, Find Sharp files for e.g.
Resolved a confusing warning dialog that directs users to consider using Read Raw when analyzing RAW files from commercial cameras.

v5.2.4 October 21, 2019

Improve the handling of offline activation.
Fixed uniformity CSV and JSON output to include Blue channel grid calculation statistics.
Instead of reporting 0 for outputs that were not able to be calculated, NaN (Not a Number) is reported.
Gamma display fixed when toggling between Original and Corrected Image in the Color/Tone Module.
Resolved Test Charts crash upon selecting Pattern#27 and setting Gamma =1.
Check for currently running instances of Imatest during installation is now functional.
GeoCal GUI writes to the user’s home folder by default now.
Fixed crash in Test Manager upon selection of edit table.

v5.2.3 October 7, 2019

Fixed a warning message that was being issued for two Imperx image acquisition adaptors.
Fixed an issue that prevented the opening of Test Manager

v5.2.2 October 1, 2019

Fixed crash when saving a screen from Color/Tone Interactive.
Fixed inability to select display after hitting cancel in setup from within Rescharts.
Fixed error that occurred when testing Read Raw functionality on a test image.
Oversharpening will now be calculated on MTF curves that don’t drop below 50%.

v5.2.1 September 25, 2019

Arbitrary Chart definitions are now checked for color definitions of the number of elements appropriate for their corresponding Encoding.
Fixed issue when trying to get noise results from an SFRreg Center Chart.
FOV from dot pattern now works correctly, particularly in cases of small spatial units (e.g. mm or smaller) for dot separation.
Edge case errors thrown in Arbitrary Charts GUI now display a more informative message to the user.
Fixed crash when selecting visual noise calculation in the Color/Tone Interactive Module.
Minor change to black-circle registration mark detection preset thresholds.

July 17, 2018

Features

MTF Compensation – MTF measurements can be compensated for measured chart quality.
Geometric Calibration – Estimate the parameters of the projective camera model from images of checkerboard patterns. Multiple cameras are supported, allowing for stereo or trifocal rig calibration. Optical distortion of various models is also estimated, as well as the extrinsic parameters of the camera(s).
Sony AYA Image Acquisition
Image Processing: Synthetic raw creation / Remosaic

Minor Features

Improved distortion calculation – Checkerboard now offers division and higher-order polynomial distortion models (up to 6 coefficients), and faster and more accurate distortion coefficient and center of distortion calculation. The division distortion model has also been added to SFRplus.
Temporal noise from multiple files now available in Multicharts and Multitest – These newer and more versatile modules for analyzing color and grayscale charts now include all important features of Colorcheck and Stepchart.
SQF settings window overhauled, improving the UI and improving calculations.
Added circle detection to Arbitrary Charts.

Minor Versions

v5.1.36 January 13, 2020 (final 5.1 release)

Fixed problem that caused eSFR ISO Auto to crash on a bad wedge.
Improved detection of color and grayscale areas.
Improved SFRplus detection on all the inner and boundary edges
Fixed uniformity interactive crash upon saving JSON and CSV data
Prevent a crash in Batchview module
Fixed issue with corrupt license files

v5.1.35 December 23, 2019

Reference files in the eSFR ISO transmissive chart now account for density differences between the patches when used for the DR measurement.
Fixed error that hindered users from selecting a custom grayscale reference file in eSFR ISO More settings window.
Fixed an error that prevented Noise plots from being displayed in eSFR ISO Module
Fixed an error that caused eSFR to crash with monochrome images when the “Step chart” box is checked.
Resolved an error that prevented PCs with NVMe drives from running on Master

v5.1.34 December 13, 2019

Resolved stepchart detection issue in Pass/Fail for eSFR ISO pattern.
Fixed Device Manager crash on MacOS 10.14.6.
Fixed crash in Multi-wedge plot in eSFR-ISO module.
Hide arbitrary charts-related buttons from the main window in Studio.
eSFR-ISO and SFRplus data file output won’t crash when grayscale patches weren’t detected in the image.
Backporting changes to VM users when their internet connection is displayed (related to error message -4304)
Fixed crash when reading monochrome images in eSFR ISO.
Fixed error that prevented noise plots from being displayed in eSFR ISO
Fixed error that hindered users from selecting a custom grayscale reference file in eSFR ISO “More settings” window.
Fixed an issue that caused reference files for eSFR ISO transmissive chart to be misread

v5.1.33 November 25, 2019

Temporal noise (2-image method) outputs from Color/Tone now have Y-channel temporal noise values.
Resolved floating license error (Error -4303) that misleadingly appeared with node-locked licenses.
Fixed an error that prevented eSFR ISO Color & grayscale chart from being analyzed in Multitest.
Fixed autodetection issue when reading an EIA chart via Multitest.
Misleading error message “Licensing library not found at ShaferFilechck.dll’” is only displayed when there is a license related issue.
Fixed SFRreg detection issue with markers outside the normal crop region.
DNG files are read through dcraw accordingly, when loaded in any analysis modules, Find Sharp files for e.g.
Resolved a confusing warning dialog that directs users to consider using Read Raw when analyzing RAW files from commercial cameras.

v5.1.32 October 23, 2019

Fixed uniformity CSV and JSON output to include Blue channel grid calculation statistics.
Improve handling of offline activation.
Resolved arbitrary charts crash in case of extreme chart misalignment.
Fixed display selection ability in Rescharts after clicking “cancel”.
Check for currently running instances of Imatest during installation is now functional.
GeoCal GUI writes to user’s home folder by default now.
Fixed crash in Test Manager upon selection of edit table.
Columns in Test Plan are stored and displayed to the user accordingly.

v5.1.31 September 16, 2019

Fixed error when selecting “openfile” in Rawview
Fix sharpfile by disabling buttons after files have been selected (helps with repeat selections).
Allowed temporal noise calculations via IT multitest module.
Edge case errors thrown in Arbitrary Charts GUI now display more informative message to user.
Arbitrary Charts definitions are now checked for color definitions of the number of elements appropriate for their corresponding Encoding.
Arbitrary Charts now displays analysis errors in the console and continue execution of other analyses, rather than halting analysis.
Fixes issue when trying to get noise results from a SFRreg Center Chart.
FOV from dot pattern now works correctly, particularly in cases of small spatial units (e.g. mm or smaller) for dot separation.

v5.1.29 August 27, 2019

Fixed bug in radial geometry
Fixed erroneous ‘Support expired’ messages.
Add scaling to sfrplus distortion-corrected image plot.
Fixed Readraw to work with an old INI file with fewer extensions

v5.1.28 August 2, 2019

Disallowed zero focal length input
SFR Fix error in cycles/milliradian
Added fill factor for Linear grayscale, Spydercheckr, rezchecker, colorgage
SFR when modulation does not drop to MTF value, NaN is reported instead of 0
SFR multi-ROI display improvement
Rescharts fix of single edge CSV output
sfrplus fix display of adjacent region after settings window open
stepchart noise nonuniformity compensation fix, earlier versions of 5.1 could produce incorrect results when patch nonuniformity is large.
multicharts/stepchart fix of spurious infinitely high SNR for noise-free images with low signal”
Fix color matrix calc in multicharts to include offset
Fix uniformity shading issue
Fix to focal length calculation with cycles/angle
Edge/MTF amplitude numbers at the end of the edge plot
SSIM bug fix
Find sharpest files bug fix
Esfriso fix wedge crash on 1-channel image
Misc. bug fixes

v5.1.27 May 28, 2019

Fixed an issue with INI file paths in the IT/EXE version of Checkerboard
Fixed issues with 2×1 regions that are missing grayscale in Multicharts and Multitest
Fixed an issue with running Checkerboard commands through the Web-based database interface
Added fill factor, distortion setting, and outer ROI setting to Colorcheck JSON and CSV output
Offline License Manager now warns the user if they paste the Activation Request Certificate into the License Certificate field
Online and Offline License Managers are now robust against leading and trailing white space in user inputs

v5.1.26 April 18, 2019

Add RCCB fake file creation to Image Processing
Add snr_bw to eSFR ISO and Multicharts/Multitest
HTML file output UTF/8 encoding
geocal monocam fix
Multicharts fix saturation (chroma) display for Colorchecker SG after CCM

v5.1.25 April 2, 2019

Added multiple-ROI MTF to SFR JSON output
Fix of License Manager “Invalid default value for property ‘securityValue’”
Fix to multicharts display bright colors
Slightly improved Scene-reference SNR notation in stepchart
Fix multicharts write of correct CCM-corrected image
Multicharts esfriso to analysis of color and grayscale patches for color matrix
Fix error with missing wedges in eSFR ISO
dcraw change folder fix

v5.1.24 March 8, 2019

Fix to Rescharts random/deadleaves crashes
Fix to omnivision capture error
Fix to colocheck display of dark luminance-corrected colors
Fix to checkerboard flip_rotate_message NaN’s cannot be converted to logicals
Fix to log-f contrast Index exceeds matrix dimensions error
Fix to esfriso crop borders which broke autodetection
Fix to colorcheck readraw “analyze as bayer” error
Fix to colorcheck readraw “read as monochrome” error

v.5.1.23 February 18, 2019

esfriso center-only wedges
multitest settings interface fix
readraw message when duplicate extensions entered

v5.1.22 February 8, 2019

rescharts improved error handling
mtf compensation repaired support for old file format
multitest rezchecker error fix

v5.1.21 January 24, 2019

Added multiple-ROI MTF to SFR JSON output
Fix of License Manager “Invalid default value for property ‘securityValue’”
Fix to multicharts display bright colors

v5.1.19 January 21, 2019

Improvements to Contrast Resolution, better calculation of the start of the dynamic range on the light side based on image contrast. Dark side still limited by SNR
Removed meaningless portion of plot on the right of the magenta dotted line
Fixed IT to throw an error on failing automatic detection on modules like spilled coins/random and Colorcheck. Does not effect SFRplus, eSFR ISO, SFRreg, or Checkerboard
Added support for 9.27 DCraw on Mac
Fixed an issue with image acquisition working with devices that require a configuration file
IT EXE modules that use the generic module like Multitest now properly write outputs to the specified folder
Added some missing error return code definitions for new licensing system

v5.1.18 January 4, 2019

Fixed saving settings with the monochrome/bater raw window
Fixed JSONs not saving in multitest in specific situations
Added allowance for Rezchecker to auto detect on 4 circles
Properly handle white space at beginning or end of strings in offline activation certificates

v5.1.17 December 23, 2018

Fixed crash using sfrplus with stepchart turned on, but the stepchart is missing
Added mean color error to Arbitrary Charts output
Changed edge ordering when using an Edge ID file so that the order is the same as the order of the file
Changed the monochrome/bayer raw window to make a little more sense

v5.1.16 January 4, 2018

Migrated to an updated licensing service. All users with license numbers beginning with 2848 will need to reactivate after installing this update. For more information, please read this blog post.

v5.1.15 December 6, 2018

Fixed linear stepchart issue
Fixed gamma calculations for Contrast Resolution runs
Fixed Contrast Resolution operating improperly on batch runs

v5.1.14 November 29, 2018

Added Mean Camera Chroma from Multicharts as meanChromaBoost to Arbitrary Charts

v5.1.13 November 15, 2018

Various Geometric Calibration fixes
Improved Checkerboard detection

v5.1.12 November 1, 2018

Geometric Calibration fix for error converting to LaTeX
Added new wedge color metric for wedge and eSFR ISO
Fixed issue with modules running when no ROIs are selected (for geometry calculations)
Added red and blue channels to JSON and CSV outputs alongside existing green channel outputs
Added keyboard commands to Geometric Calibrator, <cmd>+q and <cmd>+e exit without quitting Imatest

v5.1.9 + v5.1.11 October 11, 2018

Fixed issue that occurs when running Any Sharpness
Fixed OpenGL issue and rawview crashing with bad limits
Fixed error with ReadJSON where the default reference files were not being found
Improved layout of Options 3
Fixed single precision TIFF files not being read properly
Fixed error that would occur when trying to load a new reference file in Multicharts
Fixed crash in randcalc
Fixed crash that would occur while selecting a reference file for SFRreg
Fixed error reporting dfz not found in logf and star params
Refined MTF/Color Moire plot in Log F Contrast
Added 3D plots without contour lines
Added pixel scale to radial distortion plots
Limited bad edge angle warnings
Fixed an issue with device manager not saving out images properly

v5.1.8 September 22, 2018

Fixed error using pass/fail settings ‘hvaspect’
Fixed crash in Test Manager with unsaved changes

v5.1.7 September 20, 2018

Added exif to several json outputs
Fixed some dependencies missing for the Operator Console
Added help options next to various settings for more info
Fixed rare error in stepchart
Fixed issue running SFR in rescharts
Fixed multicharts and multitest outputs to give better results for Contrast Resolution
Fixed font sizes in new acutance window
Improved layout of the monochrome window
Fixed bad aspect ratio error when trying to run DxO dead leaves charts
Fixed high acutance values

v5.1.6 September 5, 2018

Fixed issue where during region selection on certain charts you could not change the disortion of the ROI
Fixed crash when using SQF settings window
Fixed file naming issue with multicharts_defaut_ref
Added secondary_readout_1_all_min_min to sfrplus and other pass/fail results

v5.1.5 August 20, 2018

Fixed Epiphan acquisition mex error and added SDK v3.30.3
Fixed errors referring to reference2svg
Fixed issue with pass/fail
Fixed aspect ratio issue with DxO dead leaves charts

v5.1.4 August 15, 2018

Fixed SFRreg detection issue
Added Colorcheck pass/fail settings

v5.1.3 August 13, 2018

Added a noise when find sharpest files finishes running
Fixed Dotpattern detection failing on high levels of vignetting
Fixed crash with “nobutton callback”
Fixed crash when selecting Mireds
Fixed secondary readouts MTF area not taking into account pixel size when set
Fixed ROIs in SFRreg not re-detecting when setting a crop
Added better tooltips to Multicharts
Fixed reload button flashing
Third secondary output now gets output to CSVs and JSONs

v5.1.2 August 2, 2018

Fixed various crashes in the Geometric Calibration module
Fixed some crashes in the new acutance window and readout heights being plotted at fixed distance values
Fixed spilled coins discoloration in Test Charts

v5.1.1 July 25, 2018

Fixed issue where during region selection on certain charts you could not change the disortion of the ROI
Fixed crash when using SQF settings window

September 18, 2017

Features

Database: Collect important information regarding image capture conditions, device state and EXIF metadata into Imatest’s new database system. Easily keep track of numerous testing sessions in a convenient web application.
Test Manager: Quickly execute test processes with defined test plans. The Test Manager interfaces with the Database to provide a bi-directional testing process.
Reports: Efficiently analyze data outputs. Generate reports in interactive HTML and printable PDF formats.
Arbitrary Charts: Define your own chart layout to combine image quality factors for analysis on one chart. Significantly reduce the amount of images needed to complete the testing process
Contrast Resolution: Analyze the distinguishability of two tones in a scene over a range, giving a definition of dynamic range that moves beyond noise measurements.
Image Flare Measurement: Measure flare based on the ISO 18844 flare calculation using light traps or a high density backlit chart.
Imatest IS is now Imatest Master. Imatest Master will provide all users with the ability to directly acquire images from a variety of sources. Users that have an Imatest IS license will want to download Imatest Master.
ITP is now IT. Parallel processing capabilities of ITP have been merged with IT.

Minor Features

Image statistics viewer
Enhancements to the imaging processing module;
SFRreg Center Chart enhancement for testing of ultra-wide camera systems;
Multi-Wedge plots for eSFR ISO displays
SFRreg targets on the outside of eSFR ISO targets can be automatically analyzed (for ultra-wide testing)

Minor Versions

v5.0.25 Dec 20, 2018 (final 5.0 release)

Migrated to an updated licensing service. All users with license numbers beginning with 2848 will need to reactivate after installing this update. For more information, please read this blog post.

v5.0.21 Jun 1, 2018

More Checkerboard detection improvements
Fixed IT parallel analyzer not running properly from EXE calls
Fixed uniformity interactive not displaying ISO 18844 results properly without having run fixed uniformity prior to it

v5.0.19 May 21, 2018

Fixed Dot Pattern Lateral Chromatic Aberration measurements ignoring worst case values if they are negative
Fixed linux upgrade installer not running properly from root
Added blemish pixel level resuilts to output CSV

v5.0.18 May 11, 2018

Added SFRplus distortion decentering to CSV and JSON output
Fixed new 4068 licenses not being recognized properly in the license manager

v5.0.17 Apr 27, 2018

Modified apodization additional filtering to increase smoothness of MTF curve in noisy images
Improved the detection of Dead Leaves Cross tests
Fixed rare crash with SFRreg + eSFR ISO changing rubustness
Fixed OIS module not running with more recent json files
Fixed rare blemish + uniformity crash

v5.0.16 Apr 12, 2018

Made change to prevent manual selection confirmation on SFRreg + eSFR ISO configurations from spamming users
Empty bin warning less frequent
Added center of distortion measurements to the Checkerboard module
Fixed custom box for CPIQ acutance measurements
Improved detection of SFRreg +eSFR ISO chart setups
Added noise analysis to the Colorchecker SG

v5.0.15 Mar 26, 2018

Fixes registration issue seen in 5.0.13 and 5.0.14 that resulted in a java exception
Fixes an issue running the screen pattern module, “error using zeroes”
Fixed issue running TE276 charts through the Random module

v5.0.14 Mar 19, 2018

Made some changes to allow for proxy server authentication
Fixed issue with save image through the device manager not working
Fixed SFR to work better in rare situations with off center ROIs

v5.0.13 Feb 27, 2018

Fixed Checkerboard auto detection center point for large batch runs
Fixed rounding issue in secondary readouts for normalized area peak MTF measurements
Fixed IT8.7 colorchart reference files with incorrect numbering (1 based rather than 0) causing crash
Changed build process to alleviate crashes caused by “Missing DLL” or “invalid mex” files

v5.0.12 Feb 12, 2018

Improved usage for SFRreg center chart to make the color patches effect detection less
Fixed DCRaw not running on Linux
Fixed result mismatch between max distortion in dotpattern figures and CSV
Fixed rotation sometimes reporting 180 when it is 0 for SFRplus
Fixed Log F Contrast not automatically detecting properly
Added option to output batch results as individual JSON files in Arbitrary Charts

v5.0.11 Jan 15, 2018

Fixed incorrect RGB>XYZ matrices for rec 2020 color space
License manager no longer wrongfully reports IT is active during an automatic trial
Operator console now runs properly from an Imatest IT install
Fixed some issues with square images running in Checkerboard

v5.0.9 Jan 4, 2018

Fixed error with translation running through SFR
Fixed translation causing error in license manager
Fixed rare crash with Dotpattern, “dots” not assigned during call to “CPIQDotCheck”
Fixed Rescharts save screen not creating a new directory and saving figures properly
Fixed crashes caused by error handling during translation
Fixed old INIs causing some failures in multicharts CCSG runs

v5.0.8 Dec 14, 2017

Added 32-bit and HDR output to readraw
Improved support for HDR files
Fixed display of white point in Display P3
Fixed a crash that occurred when selecting activation support

v5.0.7 Dec 11, 2017

Fixed issue in translations with multiple rows
Fixed error generating PDF reports
Fixed distortion values for predistorted charts not outputting properly
Reference values now work properly with Contrast Resolution charts

v5.0.6 Nov 22, 2017

Hot/dead pixel locations added to JSON output
Improved detection of black areas during ISO 18844 flare tests
Fixed acquisition issues on Mac
Added DR in dB to output files
Fixed issue with INI file not reading properly through the license manager with IT
Added to Arbitrary Charts Slanted edge LCA, system LCA results for CPIQ, slanted edge over sharpening and MTF50. and mean RGB values of color patches

v5.0.5 Nov 7, 2017

Added light and dark levels of slanted edges to SFR _multi.csv output
Email address field now remembers last valid address in the license manager
Fixed crash running SFRplus with distortion calculations turned off
License manager now gracefully exits with rare network failures

v5.0.4 Oct 20, 2017

Added Imaq support for Imperx FrameLink devices and removed Imperx’ VCE express adaptor which causes issues with no device attached
Fixed crashes on non-sequential grayscale charts
Fixed ISO 18844 flare crash when selecting in uniformity interactive
Fixed crashes on stars with very few cycles, now works with as few as 16 cycles
Fixed crash in checkerboard caused by a hot pixel in a very underexposed region
Fixed SFR not changing the name of its results files on save
Fixed SFR not saving results when run through express mode

v5.0.3 Oct 10, 2017

Updated Blackmagic Decklink SDK to 10.9.5
Improved cross-section log plot in image statistics to allow for wider cross-sections
Renamed “dynamic range” post processor to emphasize that it is a post processor, and not for initial dynamic range measurements
Added the option to analyze only a star pattern in the Star module, for charts that have no other features but a siemens star pattern
Added example ROI selections in the ROI selection window
Fixed issue with multicharts/multitest not correctly saving the number of linear steps in a chart selected
Fixed license manager not allowing further input after using the wrong license number length
Fixed issue with python interpreter not running properly on startup
Fixed crash in IT when the python interpreter path could not be found by adding the ability to supply a path with the [imatest]python_home INI key
Fixed blank output for dotpattern CSVs and JSONs
Fixed crash when rescharts was closed during calculations

v5.0.2 Sept 28, 2017

Small changes to help with issues not recognizing python on new installs
Better error handling when Colorcheck auto detection fails

v5.0.1 Sept 19, 2017

Fixed crash that happens when user wants to use chart configurations from other vendors in the random/dead leaves module
Fixed permissions issue with the INI folder for Mac users

September 16, 2016

Features

Checkerboard Module– Perform automated measurements of sharpness, lateral chromatic aberration, and optical distortion from images of checkerboard patterns
Autofocus Repeatability– Detect the reliability of your focusing mechanism and algorithms by analyzing collections of images captured at different distances based on the ISO 20490 standard
Random Cross Calculation– Updated texture metric with improved stability with nonlinear noise reduction
Enhanced SFRreg Detection– more robust detection capabilities that can adapt to a wider range of imaging conditions
IT .NET Acquisition Library– Acquire images directly from your device using .NET
IT .NET Async Methods– Allows for .NET asynchronous programming abilities with IT
RCCC Sensor– Raw support for a color filter array popular in automotive industries
MTF Area– A new and highly stable sharpness measurement that integrates the area below the MTF

General Changes

Updated required Matlab Compiler Runtime (MCR) to v9.0.1 (R2016a), as a result 32 bit systems are no longer supported
License manager UI updated to be less cluttered

Minor Versions

v4.5.33 Dec 20, 2018 (final 4.5 release)

Migrated to an updated licensing service. All users with license numbers beginning with 2848 will need to reactivate after installing this update. For more information, please read this blog post.

v4.5.22 June 21, 2017

Better estimation of barrel/pincushion distortion in eSFR ISO
Added undershoot and overshoot percentages to JSON output
Added square spacing to SFRplus output
Fixed an elusive issue where running SFRplus or eSFR ISO from the setup window would error out and close the program without any failure messages
SSIM now works properly with DCRaw
RCCC should now work with Rawview settings
Fixed CCM not handling 16 bit images properly
Single line distortion now working as intended in distortion module
Fixed warning message when using a density file with values above 9 saying you might be using an LAB file
Better catches for attempts at writing to files without proper permissions
Fixed multi-row grayscales in Multicharts not reloading properly
Fixed warning message when all seats for a floating license are currently in use. Before it would just give the default inactive message, now it properly informs you that there are no more seats.
Fixed an error occurring in Multicharts when trying to edit settings before loading in an image
Fixed crash caused by loading a bad pass/fail file

v4.5.21 May 12, 2017

Added partway_mean_min for pass//fail secondary outputs
Fixed device manager opening during reload in Multicharts
Fixed issue when loading consecutive images into Multicharts
Fixed misreporting of CPIQ acutance at computer default viewing distance
Fixed CPIQ spamming warnings for pixel pitch
Improved robustness for reg mark detection

v4.5.19 April 14, 2017

SSIM GUI now works properly with single channel images
Pass/fail better handling of missing data and removal of XML calls

v4.5.18 April 7, 2017

Dynamic range from slope made more robust by reducing smoothing and increasing minimum signal threshold to prevent over-estimation in high flare systems
Fixed only horizontal plots saving when both horizontal and vertical plots are set in SFRreg
Fixed manual scaling not doing anything in studio for 3d plots
Improved DNG reading to be able to handle less standard files
Fixes to pass/fail monitor keeping old data

v4.5.17 March 31, 2017

Fixed DR from slope discrepancies
Fixed crash with CPIQ Visual Noise creating crashes in JSON outputs when the answer is non-real. Now replaced with NaN
Added CCM calculations to studio
Fixed multinoise crash when reference file contains identical values
Fixed crash in Multicharts running M x N charts

v4.5.16 March 20, 2017

Improved dead leaves cross auto detection
Fixed findmtfnn crash in bad framing
Fixed multicharts crash makecharts.m with an image with no color patches
Fixed some windows still reporting a CPIQ viewing distance of 80cm
Fixed eSFR-ISO gray patch reporting incorrect exposure error due to reversed patch ordering
Cleaned up hard crash when empty frequency bins cause NaNs in randcalc, produces a nice little warning message instead
Removed ability of using Dead Leaves Cross calculations on non-Cross correlation charts

v4.5.15 March 10, 2017

Fixed crash when user doesn’t have write access needed to create results folder
Fixed “reference to nonexistent pfdata” crash in trial versions
Fixed crash for undefined “ishghangle’ in device manager
Fixed crash on start up caused by corrupt inis
Fixed crash when starting license manager
Fixed crash while changing displays during IS reloads
Fixed crash when saving data from Multicharts

v4.5.14 February 24, 2017

Tab cycling to password fields now works!
Added CPIQ QL for all patches to CSV output
Add CPIQ visual noise data for all CPIQ view condition presets to JSON output
Standardize visual noise outputs so that ISO visual noise values and CPIQ visual noise values are written to CSV both for 13% gray patch and L*50 patch for easy comparison
Change view condition for computer monitor cor CPIQ presets to 60cm from 86cm
Update sRGB linearization to current standard
Fixed nonuniformity causing a crash in multicharts
Fixed DotPattern crashing on low light images
Fixed DotPattern erroneously selecting the center of the ROI as the center of distortion
Fixed crash when trying to access a file that is already in use
Now the last frame is correctly selected in video frame analysis
Fixed trial font in license manager running off the field
Fixed dynamic range post processor placing values in the reverse order
Fixed FoV results in the .NET sample project reporting NaN
Added buttons to Imatest Studio that were already in Master
Slight improvement to detection of eSFR ISO extended charts
Fixed text running off of figures
Fixed express runs not reading custom reference files properly

v4.5.13 January 31, 2017

Added longterm checkout capabilities to network licenses
IT: Added support for Python 3.3 and 3.4
Prevented crash on bad region selections with wedge pattern
Prevented crash when accessing rescharts through setup buttons from main window
Fixed python implementation not using print properly in more recent versions
Fixed readraw sections in the INI for RCCC conversions corrupting
SFRplus displays no longer misreporting gamma
fixed testcharts not being able to create files in protected folders
Prevented crash with creating extra roi’s in distortion

v4.5.12 January 19, 2017

Added delta hue to JSON outputs
Improved SFRreg detection robustness slightly
Fixed rescharts sfr display reporting incorrect chart contrast
fixed read raw settings causing a crash when trying to demosaic RCCC images
Fixed issue with Epiphan SDK to allow it to use directshow in the operator console
Made warning messages about unexpected regions less scary
Reduced dotpattern warnings about failing area ratio test in output
Added eSFR ISO and SFRreg usage in labview sample
made it more difficult for test chart figures to be closed prematurely

v4.5.11 January 6, 2017

Undershoot/overshoot added to SFR CSV outputs
Fixed crash occurring when crop borders are extremely far outside of normal boundaries
Fixed issue with plot 4 tone adjustment in Colorcheck causing crashes
Fixed contrast ratios reporting negative in log-f contrast results
Fixed Colorchecker crashes when bad demosaicing/white balance causes the Colorchecker density row to not ascend in order properly
Fixed Rescharts saved data causing crashes

v4.5.9 December 16, 2016

Floating licenses now require checks less often to improve run times
added over/undershoot to CSV/JSON outputs
Fixed crash non-existent field ‘popup_chartype’
Fixed bad color checker images causing crash (patches not in proper ascending order)
fixed sfrplus reporting cy/pix even when cy/deg is selected

v4.5.8 December 9, 2016

Added ability to call esfr iso and sfrreg in labview
Improved wedge stability that have very few frequencies prior to aliasing
Added support for Imperx HD-SDI and analog frame grabbers custom Imaq adaptors
Stopped crash caused by cancelling runs using a non-english language set
Fixed crash involving ‘calcmd5’ caused on windows 10 machines
Fixed auto update button not working properly in non-english locales
Fixed issue measuring bayer raw images with multiple ROIs
Fixed dot pattern figure not aligning with CSV/JSON outputs on quality loss
Fixed CPIQ lateral chromatic displacement taking difference of B-G and R-G curves rather than the maximum value of either of those
Fixed OIS comparison crashing with ‘Direction_from_center’

v4.5.7 November 23, 2016

Fixed wedge detection to work for eSFR ISO charts with white inside wedges
Removed registration for floating licenses. Users now only need the license number when activating a floating license
Fixed test chart module producing 4x instead of 1x with too few wedges
Fixed rare crash with wedge calculations during IS reloads
Removed numbers from plot figures to reduce confusion
Fixed bad error message when no data exists in Dynamic Range

v4.5.6 November 11, 2016

Updated Labview example to not run JSON parser of IT call fails
Added switch in Random Settings to toggle CPIQ normalization of a texture based MTF curve
Resolved issue with select INI in studio
Fixed issue where adding “.raw” instead of “raw” as a read raw extension would cause problems
Bad reference files are no longer allowed and Imatest reverts to default
Fixed figures and other windows running off the screen in Windows so that you couldn’t click the X button
Fixed wedge moire plots always appearing even when set to off
Fixed checkerboard crashing on a large number of ROIs (was hard limited to 800, now 3000)

v4.5.5 October 27, 2016

Added partway measurements to pass/fail
Added IS support for devices with dynamic readability
Fixed various nonuniformity issues when running SFR
fixed exifreader crash
fixed crash saving images in rescharts in IS

v4.5.4 October 18, 2016

Fixed crash in sfrcalc when using nonuniformity correction
Fixed certain buttons in settings windows not working when translated to a different language
Fixed crash in esfr iso with “sfrplus_plotsplit”
Fixed visual noise CPIQ crash when running colorchecker in multicharts

v4.5.3 October 14, 2016

Added support for proxy servers with floating licensing
Added missing Labview wrappers
Updated Omnivision drivers
added changes for GigE Vision devices to hopefully prevent packet delay issues

v4.5.2 October 4, 2016

Added ColorChecker SG to ROI options window
Fixed inconsistent number of elements being plotted on vertical axis with MTF plots
Fixed the noise histogram plot hiding itself in certain situations
Fixed IS conversion to row-major ARGB images
Excluded lux values for plots requiring a lux value no longer crash
Dynamically generated GUI control throws no longer halt IS
Fixed AVT device acquisition
Visual noise results now included in JSON for Multitest
Fixed uniformity correction in Colorcheck
Fixed AF Consistency not reading same file names if same files already exist
SFRreg auto batch o longer fails when detection fails on a frame

v4.5.1 September 23, 2016

IS can now reread files being updated on your machine, and continue if it is being interrupted by reading/writing
Font sizing fixed in new license manager window
Fixed “error using text” while ruinning esfr iso with certain noise settings

March 10, 2016

Features

Ability to test auto-focus, auto-exposure, and auto-white balance
Added support for all CPIQ standard metrics
Enabled access to device level control through the Device Manager
Support for concurrent network licensing

Bug Fixes

Fixed HDR measurements not displaying properly
MATLAB display issues in 2015b can now be circumvented in Options II by selecting different display settings
Canceling saving rescharts results no longer causes a crash
Activation on linux now works properly offline
The find sharpest file utility no longer improperly links to the composite chart utility
Random now properly displays figs when [api] disable_figs = 1 in Master or IS
Fixed issue where closing Reschart window after running SFRplus setup from main menu closes all of Imatest
Progress bar now properly displays RAW images
Sharpest file utility now properly goes to sharpest file rather than composite charts
Updated progress bar to properly report status
Fixed various crashes when using new ROI selection

Minor Versions

v4.4.21 December 20, 2018 (final 4.4 release)

Migrated to an updated licensing service. All users with license numbers beginning with 2848 will need to reactivate after installing this update. For more information, please read this blog post.

v4.4.14+4.4.15 September 23, 2016

Backports of fixes in later releases for 32 bit customers
IS device manager connecting to USB 3.0 fixed
Some excluded Labview libraries are now included
Prevented crash when given “no method ‘rddisp’ for class ‘AnySharpData'”

v4.4.13 September 8, 2016

Added coordinates for wedge ROIs to json output
Over/undersharpening added to random module’s csv and jsons
More informative error for dotpattern when dots are too small, and now white dots on black background work
For blackmagic support, updated to SDK 10.7
Added CPIQreport resetting function in multifile reads
Acquire is now set to 0 when user selects image file source
Fixed acquisition issue in IS when trying to reload with acquisition turned off
Fixed device manager error reading video input when data is out of bounds
Fixed space handling in directories using acquire image
Acquire_graphin added to matlab path, no more undefined path while acquiring with a graphin device
Fixed wedge moire option in eSFR ISO rescharts
“Service file is not current version” error now links to our knowledge base on how to fix
Fixed autodetection for 36 patch dynamic range charts in stepchart
Depends folder now properly added to /bin folder for IT
Fixed filenames of saved dot pattern images acquired with IT
Fixed stepchart crashing when only using 2 ROIs
Added missing Linux C++ sample project JSONs
Added Mathworks patch that fixes a python memory leak
Fixed crash for non-existent field ‘lastmodule’
Fixed stepchart crashing with “error in interp1” on QA-61 and IDE charts
Fixed crash while trying to run OECF noise calculations when the image is flipped 180 degrees
Fixed “error in sfr_plotmtf (line 169)”
Updated CPIQ LGD metric to match final version of document
Visual noise and Acutance viewing condition preset linking in eSFR ISO
No Visual Noise results returned in JSON of eSFR ISO module or restarts running on eSFR ISO
Fixed bug caused by improper setting of sqfopt field in ini which reported wrong viewing distance results for SFR Acutance
viewing condition-dependent Objective Metrics were being calculated incorrectly for all presets except ‘Computer Monitor at 100%’. Now cycles/px calculations are based on display pixel pitch only, not image file height.

v4.4.12 August 12, 2016

Fixed Colorchecker figure reported deltaC max value mismatch with CSV
Fixed checkerboard to properly save JSON outputs and include region locations
Fixed IT crash with opcode -17
Fixed checkerboard not detecting as much as it should on heavily distorted images
Fixed USB acquisition on linux

v4.4.11 August 2, 2016

Checkerboard module added to IT

v4.4.9 July 15, 2016

Fixed infinite loop when loading invalid files in
EXIF orientation now able to be turned off in cases of auto detection breaking
Fixed issue with CCM calculations generating a blank image

v4.4.8 June 30, 2016

Fixed crash happening with certain secondary readouts
Fixed plot crash when trying to generate a figure with no valid figure data is present
Fixes to slope based dynamic range measurements
Fixed multi file input for rescharts not working properly

v4.4.7 June 17, 2016

Fixed dynamic range module crashing with missing data in CSVs
Fixed issue where figures would very rarely generate as blank
Fixed license manager not handling non-standard emails properly

v4.4.6 June 8, 2016

Fixed new stepchart dynamic range results reporting lower than normal in 4.4.4-4.4.5
T .NET: Fix for direct reading of byte[] (8-bit unsigned) and UInt32[] (32-bit unsigned) files
Checkerboard fix for crash when not using “best of above” calculation type
Fixed progress window getting in the way of other results windows

v4.4.5 May 13, 2016

Fixed multi CSVs not saving properly with one ROI selected
Fixed gamma = 1 on certain raw images causing issues
Fixed Rescharts and Multicharts monochrome CSV data saving crashes

v4.4.4 May 7, 2016

Fixed the tiny font that would appear in Rescharts instructions
IT installers now prompt failed unzips in case of corrupted files
Asian environments with non-latin root directories no longer cause problems on startup

v4.4.3 April 27, 2016

Now including the special case decoding for the Sony IMX135 sensor
Added slope-based dynamic range, an improvement over “total patch range” originally used based on arbitrary noise levels
Added a decoder for 10-bit MIPI RAW files
10-bit and 12-bit MIPI decoders can now be utilized with selecting either uint8 or uint16 input pixels
Fixed certain supported devices not showing up in the device manager
Fixed various Reschart CSV saving issues
Fixed mac builds reporting memory_display error on start up

v4.4.2 April 7, 2016

MIPI encoder for 12 bit RAW
Fixed disappearing thumbnails in rescharts
Fixed noise setting buttons in rescharts
Fixed weighted mean summary not appearing
Fixed Import/Merge INI button being unresponsive
Fixed IS device manager crashing when cancelling actions
Python direct read users will notice a speedup of image file reading
Fixed flipped images causing EXIF issues

v4.4.1 March 25, 2016

IT8.7 no longer gives strange errors when no reference file is provided
Fixed mishandling of older INI files
EXIF orientation data is now properly read
Fixed stepchart pass/fail crashes
Fixed multiregion SFR crash

December 18, 2015

Features

New OS Support: Linux Ubuntu 14.04 64-bit support
Imatest IT Python API
New SSIM (Structural Similarity Index) module for measuring perceptual losses due to data compression.
Support for 4-channel Bayer raw uniformity measurements
Added special ROI sub-region option to Uniformity and Blemish modules
Algorithm Changes
- Added outputs to Uniformity JSON results:
  - shading_plot_metric: Comma seperated list of string names for metrics in other shading_plot fields
  - shading_plot_max: Maximum values for each metric
  - shading_plot_min: Minimum values for each metric
  - shading_plot_comment: String describing shading_plot fields
  - bayer_comment: String describing Bayer raw uniformity results
  - bayerTable_entries: Comma seperated string list of regions for _mean fields
  - R_mean: Red raw mean values for the given region
  - Gr_mean: Gr raw mean values for the given region
  - B_mean: Blue raw mean values for the given region
  - Gb_mean: Gb raw mean values for the given region
  - R_B_mean_ratio: Red/Blue mean ratio for the given region
  - R_G_mean_ratio: Red/Green mean ratio for the given region
  - G_B_mean_ratio: Green/Blue mean ratio for the given region
  - Gb_Gr_mean_ratio: Gb/Gr mean ratio for the given region
  - R_Std: Standard deviation of raw Red channel center region
  - Gr_Std: Standard deviation of raw Gr channel center region
  - B_Std: Standard deviation of raw Blue channel center region
  - Gb_Std: Standard deviation of raw Gb channel center region
  - R_B_ratio_ctr2corner_mean_variation: Raw Red/Blue ratio mean difference between center and corners
  - R_G_ratio_ctr2corner_mean_variation: Raw Red/Green ratio mean difference between center and corners
  - G_B_ratio_ctr2corner_mean_variation: Raw Green/Blue ratio mean difference between center and corners
  - R_B_ratio_ctr2corner_worst_variation: Raw Red/Blue ratio max difference between center and corners
  - R_G_ratio_ctr2corner_worst_variation: Raw Red/Green ratio max difference between center and corners
  - G_B_ratio_ctr2corner_worst_variation: Raw Green/Blue ratio max difference between center and corners
  - R_ctr2corner_mean_variation: Mean difference between center and corners in the Red raw channel
  - Gr_ctr2corner_mean_variation: Mean difference between center and corners in the Gr raw channel
  - B_ctr2corner_mean_variation: Mean difference between center and corners in the Blue raw channel
  - Gb_ctr2corner_mean_variation: Mean difference between center and corners in the Gb raw channel
  - R_ctr2corner_worst_variation: Max difference between center and corners in Red raw channel
  - Gr_ctr2corner_worst_variation: Max difference between center and corners in Gr raw channel
  - B_ctr2corner_worst_variation: Max difference between center and corners in Blue raw channel
  - Gb_ctr2corner_worst_variation: Max difference between center and corners in Gb raw channel
- Fixed issue where some ROI displays would generate extreme values and not display images correctly
- Users can now cancel batch runs during the run
- Fixed a rare issue where plots would not appear and figures would generate empty
- Fixed several issues with INI files not parsing or updating correctly
- Fixed issue where CSV results from multiple files could be incorrectly combined into a single file
- Fixed issue where IT modules would sometimes not save XML results correctly
- Fixed crash related to eSFR-ISO runs when no wedges could be measured
- Fixed an issue where IT8.7 reference files would not be recognized
- Fixed some issues with the IS Push Interface preventing it from running correctly
- Addressed problem in the Stepchart module where invalid values for number of patches could be entered
- Fixed issue preventing use of Graphin EasyLab devices in Imatest IS
- Made all charts generated in Test Charts correctly use highlight color option (some charts would allow selection of highlight color but not display it)
- Updated required Matlab Compiler Runtime (MCR) to v9.0 (R2015b)
- Added optional input parameter for IT that allows an image file to be loaded from disk when using acquire_image

Minor Versions

v4.3.9 December 20, 2018 (final 4.3 release)

Migrated to an updated licensing service. All users with license numbers beginning with 2848 will need to reactivate after installing this update. For more information, please read this blog post.

v4.3.3+ January 21, 2016

Back ports of fixes in done in 4.4

v4.3.2 January 11, 2016

Fixed milticharts csv and multitest json problems
Fixed disable_figs = 1 disabling plots generated for Master/IS
Fixed installation ID’s not being visible in Linux builds
Fixed bug with saving results from rescharts

v4.3.1 December 28, 2015

Added MTF detail to the random output module
Added _pct and gb_gr variations to pass/fail
Fixed the probe tool
Fixed multi roi crashes
Fixed blemish crash with shading uniformity
Small cosmetic fixes with the new progress bar

September 16, 2015

Features

Interface is now available in Simplified Chinese, Traditional Chinese, and Korean
New SFRreg module: Allows SFR evaluation of arbitrarily placed registration mark patterns (See SFRreg Documentation)
Added new Point Spread Function (PSF) display to SFRplus, eSFR-ISO, and SFRreg: PSFs can be estimated from colocated, near-sagittal and tangential edges
Replaced the license manager with a new system with an improved interface (See Activation Documentation)
Added support for all BitFlow framegrabber to IS and IT
Added support for all Blackmagic framegrabbers to IS and IT
Added Multitest module to IT libraries
Added new Educational apps to Imatest Help menu. These tools provide visual illustrations of several core image quality concepts
Added acutance display and output to Log-F Contrast
Added pre-distortion preview to Test Targets to make selecting pre-distortion values easier
Added circular registration mark variant to SVG quadrant pattern in Test Targets
Added new extrapolated MacAdam ellipses to most color plots in Multicharts and Multitest. Based on original research by David L. MacAdam, Visual Sensitivities to Color Differences in Daylight
Updated Omnivision support to include 18-bit and 20-bit sensors and YUV format
Imatest IT now has a complete exception hierarchy

Added CPIQ-based Chroma Level output to Multicharts, SFRplus, and eSFR ISO JSON results:

mean_chroma_saturation_CPIQ: Chroma level value as defined by the CPIQ standard as of Draft v17

Added Delta Hue to JSON and CSV output in Colorcheck:

Delta_L: Difference in lightness (L*) between reference and target patch values
Delta_chroma: Difference in chroma (C*) between reference and target patch values
Delta_hue: Difference in hue angle between reference and target patch values

Added the following outputs to Multitest/Multicharts JSON and CSV:

exposure_error_f_stops: Overall exposure error in f-stops
grayscale_zone: Number key for each patch in order for all following grayscale fields
grayscale_minus_log_exposure: -Log exposure of each grayscale patch
grayscale_#_density: Density of each patch for a given channel where # is Y for luminance, G for green, etc…
grayscale_#_mean: Mean pixel value of each patch (in 8-bit scale) where # is Y for luminance, etc…
White_Bal_error_Degrees: White balance error in degrees for each patch
White_Bal_error_Mired: White balance error in Mireds for each patch
White_Bal_error_H_HSV: White balance error in Hue in the HSV color space
White_Bal_error_Delta_C_ab: White balance error in delta C_ab
White_Bal_error_Delta_C_94: White balance error in delta C₉₄
White_Bal_error_Delta_C_00: White balance error in delta C₀₀

Added eSFR ISO wedge location information to JSON and CSV output:

wedge_number: Array of numbers for each measured wedge corresponding with position of following values
low_freq_wedge_center_locations_x: Low frequency wedge center x in pixels
low_freq_wedge_center_locations_y: Low frequency wegge center y in pixels
low_freq_wedge_center_corner_pct: Low frequency wedge field position in percentage
high_freq_wedge_center_locations_x: High frequency wedge center x in pixels
high_freq_wedge_center_locations_y: High frequency wegge center y in pixels
high_freq_wedge_center_corner_pct: High frequency wedge field position in percentage

Algorithm Changes:

Improved wedge calculations and tolerance to non-uniform lighting
Changed ISO 12233:2014 SFR correction factor to be enabled by default (Note: Previous INI files with the setting disabled will not be changed)

Interface Changes:

Removed unused “Plot 9” option on some save results windows
Added indicator to wedge displays to show the onset of aliasing
Generally improved and updated wedge plots
Changed color on some plots to improve readability
Improved OIS/Image Compare display when images cannot be found
Added ability to load ROI settings in the Functional Interface
Removed IS Multi-ROI display from Imatest Master as it is only relevant in IS
Added new Options III window accessable from the Settings menu
Moved Luminance equation option to Options III from Options II
Added Planckian locus to xy and u’v’ plots in Multicharts and Multitest
Added checkbox to IT Settings window to modify the INI setting related to attempting to continue on error or throw error further up

Fixes:

INI files now support non-Latin characters in file paths
SFRplus Auto now no longer issues a warning for Chromatic Aberration plots when analyzing a monochromatic image
Fixed bug when reading reference files that use comma decimal seperators
Fixed major bug where using the new ROI selection option with Stepchart could cause some charts to fail and crash
Improved stability of IS reloads on OSX
Fixed several bugs related to batch runs of eSFR-ISO files
Allowed batch runs of differently sized images in eSFR-ISO Auto
Fixed bug where selecting IT8.7 in Multicharts would warn the user about a missing reference file before allowing the user to select any file
Raw conversion will now notify the user with a helpful message if it fails during normal module runs
Fixed bug where OIS/Image Compare would display an invalid file warning before the user is able to select a file
Unchecking and rechecking “Acquire from device” in IS now correctly reverts back to the last used device
Fixed bug where setting raw files to be decoded into PGM files instead of TIFF could cause a crash in later module runs
Fixed bug in IT where figures would still display when INI file settings should have disabled them
Fixed bug where SFRplus geometry would not recalculate when INI settings indicated it should always be recalculated
Fixed uninstallers so that shortcuts are correctly handled
Fixed issue in eSFR ISO modules where secondary readouts were being populated with incorrect data
Fixed occasional crash in Distortion module where plotting would fail due to certain image types
Fixed issue where after running a module, the cursor would appear as a magnifying glass on the main window
Fixed issue in IT where running Dot Pattern could cause progress bars to appear when they shouldn’t
Fixed bug in SFRplus detection routines where charts that were off-center by one column would detect incorrectly and cause calculation failures
Fixed issue with Save ROI Settings in SFR, ROI settings are now saved correctly
Improved INI file read/write speeds
Improved color chart detection on SFRplus images that are not well centered
Improved support for images of displays with discrete, visible pixels
Changed INI file version to reflect significant changes in the format (See this post)
Moved to Matlab Compiler Runtime v8.5
Imatest IT 64-bit sample projects now have correct 64-bit build targets
Now using new icons for all applications
Deprecated inputKeys options 1, 2, and 3 in all IT libraries. Instead use 99, ‘JSON’, 111, or ‘JSONXML’
Fixed modules (e.g. SFR, Random, Star, etc…) now default to always generate their first plot
Deprecated rescharts.ini and multicharts.ini. All INI settings are now stored in imatest-v2.ini by default
Extended support for MxN charts in Multicharts/Multitest to allow for up to 50×50 patch charts

Minor Versions

v4.2.13 December 20, 2018 (final 4.2 release)

Migrated to an updated licensing service. All users with license numbers beginning with 2848 will need to reactivate after installing this update. For more information, please read this blog post.

v4.2.11 December 3, 2015

Added ability to flip images upside down
Fixed problem with reading DNGs
Fixed crash with uniformity interactive
fixed rare crash in calculating color matrix

v4.2.9 November 19, 2015

Fixed issue with 64 bit installers not properly extracting the MCR
Fixed rare case of secondary SFR readouts not being consistent

v4.2.8 November 12, 2015

Fixed SFRplus crash reporting problem with Macadam ellipses
Fixed problem with setting 4×3 color matrices
Improved usability of probe
Fixed crash when using Uniformity Delta-C 2000 contour plot

v4.2.7 November 5, 2015

Fixed occasional crash in Dead Leaves measurements

v4.2.6 October 29, 2015

Temporal S/N calc can now be performed on two frames from mp4 video
Out of memory errors now give a nice out of memory response rather than a crash
EXIF data now properly displayed in various modules like blemish and stepchart
Fixed ACES color matrix error
Fixed crash when using standardized sharpening

v4.2.5 October 22, 2015

Veiling glare calculations will allow for the black trap to be next to the lightest patch as well as the darkest
Save image should now work properly in rescharts
SQF output added to Log F-Contrast
XMLs now properly generating for certain modules

v4.2.4 October 15, 2015

Select INI default function now resets the proper fields
Fixed a*b* color error not plotting properly

v4.2.3 October 12, 2015

Fixed occasional crash with new ellipses in eSFR ISO
Fixed various Select INI functional issues, not saving defaults, not saving between runs, etc.
Improved support for high bit-depth files
Fixed SFRplus detection issue where the center column would be misaligned if the image was cropped irregularly
Improved Test Chart module speed

v4.2.2 October 6, 2015

Radial distortion plot added to eSFR ISO

ROI fine adjustment has arrows added to the movement buttons, removed clutter
Added “best of above” to distortion settings and output
License activation issues with IT not generating the proper file fixed
Newly selected INI’s are now remembered after restarting Imatest
Fixing up tooltips to be more current
Certain legacy INI’s would not properly update
3D plots display now spaces itself out to prevent data overlaying on each other

v4.2.1 September 16, 2015

Added histograms of levels & gradients to Random in Rescharts
Improved radial distortion plot
Added JSON output to Dot Pattern
Fixed issue with INI file corruption
IT no longer causes crashes when trying to activate
Fixed crash with Isolight ColorChecker autodetection crashing

March 2, 2015

Features

Added support for ISO 15739 visual noise
Added batch processing for video file frames

Algorithm Changes

Changed default luminance equation to newer NTSC weightings
Added alternative XYZ color correction matrix calculation

Interface Changes

Removed noise settings for eSFR ISO and SFRplus color targets in Multitest Setup window. These targets do not have valid noise calculations.
Improved “select all” functionality in ROI selection
Formatting for Mac in the “Unsuitable ROI” window in Colorcheck makes more sense
Added message box for when license support is expired
Added warning messages in OIS when selecting invalid JSON files
Improved resolutions for image thumbnails in certain modules
More license info included in the About window
Various Mac interface improvements, such as closing windows via the system close button
Added error message on improper RAW settings

Bug Fixes

Fixed error when selecting “Error Handling” button
Fixed bug that would interfere with video error reports
Rescharts no longer allows for faulty batch runs
Fixed issue where the “Mirror Image” button in Colorcheck would undo previous mirror settings
Fixed issue where very narrow, verticle crops in Colorcheck would crash
Fixed issue where Colorcheck would sometimes fail to generate the a*b* color error chart
Fixed global ROI detection settings so that they override local ROI settings
Fixed rare error for SFRplus region detection
Fixed occasional error where “crop borders” during SFRplus region selection would cause a crash
Fixed excessive errors that stacked up when doing batch runs
Fixed error in Multitest to prevent noise analysis in regions where it cannot work
IT settings window now creates a directory when one does not exist
IT settings window no longer writes to a redundant INI
Fixed bug in OIS where plots weren’t displayed properly and selected JSON files were ignored
Fixed issue where double clicking buttons fast enough would cause a crash
Fixed issue with pressing the “enter” key not working as expected
Fixed crash in OIS when selecting Multi-ROI plot type
Fixed issue in Multitest where checkboxes would be unselected when switching to a different chart type
Fixed issue in Imatest IS where auto-reloaded thumbnails did not update properly
Fixed obscure bug where the pass/fail monitor would cause other windows to be difficult to close
Fixed potential auto detection conflicts for Random and Siemens Star charts
Fixed various issues with log F contrast in Rescharts not working properly and causing crashes
Fixed DCraw failure on Mac
Fixed issue with IS evaluation mode not working properly
Allow for more devices list in IS to include new devices
Fixed bug in recharts when crashing after pressing display after cancelling a read
Added eSFR ISO to the main IT library dll

Minor Versions

v4.1.17 December 20, 2018 (final 4.1 release)

Migrated to an updated licensing service. All users with license numbers beginning with 2848 will need to reactivate after installing this update. For more information, please read this blog post.

v4.1.13 July 13, 2015

Improved display for RAW sensor noise
Added grayscale a*b* errors to sfrplus plots
Unequal eSFR ISO image sizes can now be read in batch mode
Fixed bug in IT with uniformity crashing
OSX Master no longer auto closes on failure to launch
Extra wedge eSFR ISO chart crashes fixed
Fixed stepchart crash caused by the new ROI method

v4.1.12 June 25, 2015

Fixed differences in IT and master during batch reads
Fixed crashes during ROI selections for random charts

v4.1.11 June 15, 2015

Added mirror to Multicharts and Multitest
Added the option for no nonuniformity correction in Stepchart, Colorcheck, Multicharts, and Multitest
Dynamic range calculations now give warning when S/N data is bad
Added MTF center (or max) to csv and json outputs
White balance info added to multicharts/multitest CSVs and JSONs
Fixed dynamic range in Studio
Stopped erroneous 180 degree angles added on to chart tilts
Fixed issue with IT file naming
System command window now exits properly
Batch runs now always recalculate distortion
Stepchart SNR more consistent with Multicharts
Fixed thumbnail for bayer raw images in Multicharts
Fixed session information for extremely large batch runs
Fixed pixel shift outputs for SFRplus JSONs
Fixed save for Log F Contrast Acutance plots

v4.1.8 May 29, 2015

Added Acutance to Log F Contrast
Added readout button to edge/MTF plots in Rescharts
Added half and quarter edge crops to Edge/MTF plot
Added HDR TE241 chart (Dmax=6) to stepchart, multicharts
Fixed various eSFR ISO noise crashes in rescharts
On fast machines certain figures like 3D plot would save incorrectly
Fixed various save screen operations in Rescharts
Fixed eSFR ISO crashing on 16:9 crops
fixed wedge plots for eSFR ISO crashing when wedges are outside of crop
Fixed extra wedge eSFR ISO chart crashing when certain wedges selected
Stopped SFRplus from stopping a batch run when a region detection fails

v4.1.6 May 5, 2015

Added more data cursor functionality in interactive modules
Fixed B-G CA Crossing values in single region CSV outputs
Fixed rare crashes on extra eSFR ISO wedge runs
Fixed IT bug with undefined function “crs”

v4.1.5 April 23, 2015

Support for new eSFR ISO charts with added wedges
Dot Pattern now more stable
Chromatic Aberration now includes x and y pixel shift
Improved thumbnails in interactive modules like Multicharts and Rescharts
Fixed timestamps for certain charts showing in the wrong spot
Using new ROI selection in stepcharts would now displays new chart selections properly
New ROI now more stable with Blemish, used to occasionally crash
Dot Pattern CSV save now works properly
Dynamic range doesnt fail on certain saves
Fixed error where close figures button would also close the pass/fail window
Fixed pass/fail monitor functionality with Rescharts
Legend in batchview no longer obscures plots
Multiframe TIF files are now detected properly
SFRplus Light/Dark Noise now included on all channels and regions when Speedup is turned off (keeps center-only if its checked)
Dynamic range now has a json output
General improvements to SFRplus auto detection

v4.1.3 March 30, 2015

Added support for multiburst calculations in stepchart
Fixed error where Multicharts would sometimes fail on uncommon reference files
Fixed rare error where eSFR ISO wouldn’t run due to non existent ‘dynmax’
Fixed issue where uniformity CSV data was not matching the figure results
Fixed issue where enabling eSFR ISO wedge detection would break rescharts until setup was re-run
Fixed issue where RAW read auto bitshift for 16 bit images with output of 8 bit images would not work properly
Fixed issue that caused rare images with a specific edge profile to crash
Fixed SFRplus distortion bar detection failing on rare cases
Fixed issue where SFRplus would crash if the user did not already use SFRplus Setup
Fixed problem where corrupt INI’s were caused by previous SFRplus crops being applied to a new image
Fixed SFR crash when adjusting multiple ROIs
Fixed SQF figure not closing when close figures after save checkbox selected in Starchart
Changed error report to disallow setting support@imatest as the user’s email, more intuitive

v4.1.2 March 20, 2015

Implemented ISO 12233:2014 SFR correction factor, turned off by default. More detail here.
Removed superfluous plot saving option
Fixed issue with standard sharpening option in sfrplus auto causing crash
Fixed rare issue with SFRplus crashing and reporting non-existent field ‘idealims’
Fixed issue with Colorcheck ROI settings incrementing every time the window is reopened
Fixed rare error where Colorcheck would crash on vertical crops
Fixed rare auto detection failure with bad registration mark locations
Fixed rare ‘idealims’ error in rescharts
Improved autodetection handling SFRplus bars run off image
Added image file names to JSON results in other modules like they are in SFRplus
Restored old Colorcheck ROI method

v4.1.1 March 11, 2015

Improved license expiry error message to encourage user to deactivate and then reactivate.
Fixed issue with installers occasionally not working due to quotes in path name
Fixed issue with saving CSV’s for several modules, including Multitest 36 patch density charts and Rechart SQF
Fixed invalid mex file bug
Fixed extremely rare sfrplus detection bug that would happen with certain crops
Fixed crash with wedge calculations caused by absent aliasing
Modified imatest.ini so that certain values are not overwritten for IT
Fixed sporadic failures to detect centers on OSX
Added INI setting that disables legend generation
Added barrel distortion to SFRplus
16:9 aspect ratio dynamic range chart to Test Charts

July 21, 2014

Features

eSFR ISO automatically analyzes new ISO 12233:2014 Edge SFR chart (from the specification published Feb. 2014) using an interface similar to SFRplus. It can be run interactively in Rescharts or in fixed (batch-capable) mode (eSFR ISO Auto).

A Pass/Fail Monitor that can stay open during Imatest module runs provides immediate real-time Pass/Fail indication: valuable for testing Pass/Fail criteria for Imatest IT.

Support for Targa (TGA), ArriRaw (ARI), and DPX (digital cinema) files has been added. Not all DPX variants are supported: please send us files you have trouble reading.

Support for several video color spaces has been added: ACES, DCI-P3 (for projectors), Rec. 709 (Legal and Full), and Rec. 2020 (Legal and Full).

Automatic region detection is available for several test charts: Colorchecker, Imatest 36-Patch Dynamic Range, and Imatest Spilled Coins/TE265 Dead Leaves, as well as new versions of the Log F-Contrast, ISO 14524 and ISO 15739 charts that contain registration marks. Most settings can be made with the Options I ROIs… button in the Imatest main window.

Dynamic Range results have been added to the Multicharts/Multitest noise calculations. Density response can be displayed above the noise plot.

The Imatest main window has been redesigned to be larger with a more logical layout: buttons for Random/Dead Leaves, Log F-Contrast, Star, Wedge, and Any image sharpness have been added. A Last module button is displayed near the lower-left for convenience. The last module run by Multitest is displayed.

The Help mode button (bottom of Imatest main window) alters the window so that all buttons display their corresponding website instructions.

SFRplus shift-dependent geometry recalculation speeds up repeated SFRplus runs for real-time focus tests by not recalculating SFR region position unless there is a significant change in the position of the slanted edges.

Imatest IS push-interface is a C++ DLL version of Imatest IS with an extra interface layer that allows for simple communication with Imatest IS